Ferrogard 440N Magnetic Safety Switch, Plastic, 24 V dc

Datablad
Lagstiftning och ursprungsland
RoHS-Försäkran
COO (Country of Origin): DO
Produktdetaljer

Ferrogard 6, 9 & 10 Slim Non Contact Safety Switch

The Ferrogard FRS 6, 9 and 10 are magnetically actuated non-contact safety switches which offer reliability and a high tolerance to misalignment. Designed to be installed on a guard door, the action of the magnetic actuator being removed from the switch opens the N.C. safety contacts therefore isolating the control power to the machines primary control element. Moulded in ABS plastic with a slim rectangular housing to accommodate narrow mounting areas and sealed to IP67 (NEMA 6P), these non-contact switches are ideal for wet environments. They have two active sensing faces allowing more flexible mounting options.

Slim housings to accomodate narrow mounting areas
Two active sensing faces allowing more flexible mounting options
Operating distance for safety contacts: make 12mm; break 23mm
Operating temperature range: -10°C to +65°C
M4 mounting
IP67 rating (NEMA 6P)
Cat. 1 Device per EN954-1 Dual channel interlocks suitable for Cat. 3 or 4 systems

Standards

EN954-1, ISO13849-1, IEC/EN60204-1, NFPA79, EN1088, ISO14119, ANSI B11.19, AS4024.1.

Approvals

CE Marked for all applicable directives and cULus.

Specifikationer
Attribute Value
Supply Voltage 24 V dc
Safety Contacts NC
Housing Material Plastic
Connection Type 2m cable
Switch Type Safety
Range Ferrogard
Series 440N
Switching Distance 12 mm, 23 mm
IP Rating IP67
Actuator Included Yes
Actuator Type Magnetic
Sensor Principle Magnetic
Dimensions 84 x 19 x 16 mm
Depth 16mm
Length 84mm
Safety Category 1
Housing Colour Red
Width 19mm
Det är tyvärr inte möjligt att visa lagerbehållning för närvarande. Uppdatera sidan och försök igen.
Pris (ex. moms) Each
1 111,38 kr
(exkl. moms)
1 389,22 kr
(inkl. moms)
Enheter
Per unit
1 +
1 111,38 kr
Nästa dag-leverans inte möjlig
Related Products
The SensaGuard Non-Contact Switch is PLe, SIL 3 ...
Description:
The SensaGuard Non-Contact Switch is PLe, SIL 3 and Cat 4 rated and is intended for use with sliding, hinge or lift-off machine guard doors. These safety switches are based on RFID (Radio Frequency IDentification) technology for coding and inductive ...
The HYGIECODE MMC-H safety switch has been developed ...
Description:
The HYGIECODE MMC-H safety switch has been developed for non-contact interlocking of hinged, sliding or removable guard doors.It is ideal for applications that require a wide tolerance to misalignment, high switching capacity or high level of hygiene.When used with a ...
the Str1 transponder safety switch has monitored semiconductor ...
Description:
the Str1 transponder safety switch has monitored semiconductor outputs (oSSds) and can be safely connected either individually or in series. It can be used for applications where a high level of manipulation protection is required. the Str1 is available with ...
The Bernstein AG RFID safety switch has a ...
Description:
The Bernstein AG RFID safety switch has a non-contact safety sensor that monitors moveable safety guards, such as doors, flaps and hoods. It belongs to the SRF series of safety switches. It is suitable for all coding levels. With its ...