Chauvin Arnoux PO1120074A Multimeter Current Clamp Adapter, 450mA dc, 300mA ac, 3.9mm With UKAS Calibration

  • RS-artikelnummer 911-9513
  • Tillv. art.nr P01120074A
  • Tillverkare / varumärke Chauvin Arnoux
Datablad
Lagstiftning och ursprungsland
Ej tillämpbart
COO (Country of Origin): US
Produktdetaljer

K1 and K2 low-current probes

Current probes to measure low DC and AC currents.
Easily adapted to all 19 mm standard spacing multimeters.
Zero reset using a thumb wheel with disable feature.
2 LEDs display overload (red LED) and the correct battery level (green LED).
Applications: loop measurements 4 → 20 mA without opening the circuit, low current measurements, default current measurements etc.


Standard: IEC 1010-1, 600 V Cat. III, deg. 2 if used with a multimeter of the same category.

Specifikationer
Attribute Value
Adapter Type AC/DC
Maximum DC Current 450mA
Maximum AC Current 300mA ac
Best Accuracy ±1 %
Resolution 50 (DC) μA, 100 (AC) μA
Maximum Conductor Size 3.9mm
Calibrated UKAS
Safety Category CAT II 300 V
Output Type Current
Connector Type 4 mm
Battery Type 9V
Battery Life 20 h
Cable Length Extended 1.5m
Maximum Operating Temperature +55°C
Minimum Operating Temperature -10°C
Safety Category Level CAT II
Safety Category Voltage 300V
Model Number p PO1120074A
1 I lager för leverans inom 3-5 arbetsdagar
Pris (ex. moms) Each
6 076,44 kr
(exkl. moms)
7 595,55 kr
(inkl. moms)
Enheter
Per unit
1 +
6 076,44 kr
Nästa dag-leverans inte möjlig
Related Products
ICA39T from the RS Pro range of current ...
Description:
ICA39T from the RS Pro range of current clamp adapters. 1.9% basic D CA / A CA accuracyNon-intrusive transducingUp to 29 mm Diameter conductorShock Proof: 5 ft dropCoiled cable output plugsErgonomically designed jaw and triggerAC-DC 1000 A capabilityAuto-zero key for ...
FLIR TA72 Universal Flex Current Probe. The probe ...
Description:
FLIR TA72 Universal Flex Current Probe. The probe accessories are simple and easy to use, designed to get the best readings with your existing meter. Manufactured with a narrow flexible coil clamp, the TA72 lets you easily take measurements in ...
Rugged current clamp adaptor suitable for use with ...
Description:
Rugged current clamp adaptor suitable for use with multimeters to give non intrusive measurement of d.c. and a.c. current. Integral 1.2m 4mm shrouded plug lead. Jaws accept conductor size of 1 x 30mm or 2 x 25mm dia.d.c. current zero ...
Rugged current clamp adaptor suitable for use with ...
Description:
Rugged current clamp adaptor suitable for use with multimeters to give non intrusive measurement of d.c. and a.c. current. Integral 1.2m 4mm shrouded plug lead. Jaws accept conductor size of 1 x 30mm or 2 x 25mm dia.d.c. current zero ...