Chauvin Arnoux Multimeter Current Clamp Adapter

  • RS-artikelnummer 133-6378
  • Tillv. P01120630
  • Tillverkare / varumärke Chauvin Arnoux
Lagstiftning och ursprungsland
Ej tillämpbart

Chauvin Arnoux AmpFLEX® A110 Series Flexible Current Sensors

These compact, lightweight and ergonomic sensors of varying diameters are capable of clamping all types of conductors, whatever their number, dimensions or shape (bars, etc.). Due to their flexibility, they can be used in any location, however cramped. They are ideal for the requirements in both industry and the tertiary sector. Their quick and easy opening/closing system makes them simple to handle even when wearing safety gloves. The AmpFlex® A110 Series comprises 3 flexible sensor models for direct connection to any multimeter, wattmeter or logger. These flexible coils offer the following major advantages:
• Large measurement range
• Bandwidth suitable for industrial frequencies and harmonic analysis
• No saturation effect, so no overheating
• Constant low phase shift appropriate for watt metric measurements

Features and Benefits

• Measurement Range: 80 mA to 30 kA • 4 calibres
• Sensor Length (clamping diameter): 45 cm, 80 cm or 1.20 m (Ø14 cm, Ø25 cm, Ø38 cm)
• Ingress protection of sensor/processing unit: IP67/IP54
• Output Signal: AC voltage
• Output via two-wire lead terminated by 2 x Ø 4 mm straight male banana safety connectors
• Power Supply: 2 x 1.5 V AA batteries or external μUSB type B 5 V
• Battery Life: 300 hours
• 1000 V CAT IV
• Single phase flexible current sensors
• IP67

Supplied with

1 flexible current sensor, 2 x 1.5 V AA / LR6 alkaline batteries, 1 user manual in 5 languages, 1 safety datasheet and 1 verification certificate

Attribute Value
Adapter Type AC
Best Accuracy 1 %
Maximum Conductor Size 120mm
Safety Category CAT III 600 V, CAT IV 1000 V, CAT IV 600 V
Output Type Voltage
Connector Type 4 mm Plug
Battery Type Alakine, LR6, 1.5 V AA
Battery Life 300 h
Cable Length Extended 45cm
Maximum Operating Temperature +55°C
Minimum Operating Temperature -10°C
Safety Category Voltage 600 V, 1000 V
Safety Category Level CAT III, CAT IV
Model Number p AmpFLEX A110-045
I lager för leverans inom 2 arbetsdagar
Pris (ex. moms) Each
3 691,38 kr
(exkl. moms)
4 614,22 kr
(inkl. moms)
Per unit
1 +
3 691,38 kr
Nästa dag-leverans inte möjlig
Related Products
Bi-directional IR / USB interface adapterIsolated transmission of ...
Bi-directional IR / USB interface adapterIsolated transmission of measured data to the USB interface on the PCMETRAwin 10 software available as separate item (order no.: 292-1331)Compatible with METRAHIT X-TRA, TECH, T-COM.
Fluke pc3000 FC Adapter must be connected to ...
Fluke pc3000 FC Adapter must be connected to the USB port in order to enable communication between FC modules and software.SW3000 will support up to two pc3000 FC Adapters. OS Compatibility: Windows XP or laterNot compatible with Fluke CNX test ...
ICA39T from the RS Pro range of current ...
ICA39T from the RS Pro range of current clamp adapters. 1.9% basic D CA / A CA accuracyNon-intrusive transducingUp to 29 mm Diameter conductorShock Proof: 5 ft dropCoiled cable output plugsErgonomically designed jaw and triggerAC-DC 1000 A capabilityAuto-zero key for ...
Rugged current clamp adaptor suitable for use with ...
Rugged current clamp adaptor suitable for use with multimeters to give non intrusive measurement of d.c. and a.c. current. Integral 1.2m 4mm shrouded plug lead. Jaws accept conductor size of 1 x 30mm or 2 x 25mm dia.d.c. current zero ...