STMicroelectronics L298P013TR, Brushed Motor Driver IC, 46 V 4A 20-Pin, PowerSO

Datablad
Lagstiftning och ursprungsland
RoHS-Försäkran
Produktdetaljer

L298 Dual Full Bridge Motor Driver

ST Microelectronics presents its L298 dual full bridge driver series. The L298 series from ST is an integrated high voltage, high current dual full bridge driver. These devices are specially designed to accept standard TTL logic and drive inductive loads in Relays, Solenoids, DC and Stepper Motors. Featured are two enable inputs that allow the L298 to be enabled or disabled independently of the input signals. The emitters of the lower transistors of each bridge are connected together, the corresponding external terminal can be used to connect an external sensing resistor. In addition, a supply input is provided so that the logic works at a lower voltage.

Features

  • Operating supply voltage up to 46 V

  • Total DC current of up to 4 A

  • Low saturation voltage

  • Over-temperature protection

  • Logical "0" input voltage up to 1.5 V (high noise immunity)

What are Motor Driver IC's?

Motor Driver ICs are current amplifiers and are an essential component of motor interfacing. The motor driver integrated circuit chip acts as the interface between a microprocessor or microcontroller, and a motor. As microprocessors tend to operate at lower currents, and motors at higher, motor driver ICs are needed to supply current to the motor as needed. The RS Components range of Motor Driver ICs includes models from leading brands, in various types and configurations to support your design needs.

Motor Controllers & Drivers, STMicroelectronics

Specifikationer
Attribute Value
Motor Type Brushed DC
Output Configuration Dual Full Bridge
Maximum IGBT Collector Current 4A
Maximum Collector Emitter Voltage 46 V
Mounting Type Surface Mount
Package Type PowerSO
Pin Count 20
Maximum Operating Supply Voltage 46 V
Minimum Operating Supply Voltage 4.8 V
Typical Switching Frequency 25kHz
Dimensions 16 x 11.1 x 3.3mm
Width 11.1mm
Height 3.3mm
Length 16mm
Maximum Operating Temperature +130 °C
Minimum Operating Temperature -25 °C
105 I lager för leverans inom 1 arbetsdagar
Pris (ex. moms) Each (In a Pack of 5)
51,618 kr
(exkl. moms)
64,522 kr
(inkl. moms)
Enheter
Per unit
Per Pack*
5 - 20
51,618 kr
258,09 kr
25 - 95
40,926 kr
204,63 kr
100 - 245
35,508 kr
177,54 kr
250 - 495
33,792 kr
168,96 kr
500 +
32,446 kr
162,23 kr
Förpackningsalternativ:
Related Products
A range of advanced Smart Power Modules from ...
Description:
A range of advanced Smart Power Modules from Fairchild Semiconductor which provide compact high performance solutions for many inverter motor drive applications. The modules integrate optimized gate drive for the built-in power MOSFETs to minimize EMI and losses and also ...
The STSPIN32F0A is a System-In-Package providing an integrated ...
Description:
The STSPIN32F0A is a System-In-Package providing an integrated solution suitable for driving three-phase BLDC motors using different driving modes. It embeds a triple half-bridge gate driver able to drive power MOSFETs with a current capability of 600 mA (sink and ...
Accurate position controlHigh efficiencyLow-Power consumptionApplications in automotive, vending ...
Description:
Accurate position controlHigh efficiencyLow-Power consumptionApplications in automotive, vending machines, ATM machines, paper feed in printers, scanners, security cameras.
BD63920MUV is a bipolar low-consumption driver that driven ...
Description:
BD63920MUV is a bipolar low-consumption driver that driven by PWM current. Rated power supply voltage of the device is 36V, and rated output current is 2.0A. CLK-IN and PARA-IN driving mode is adopted for input interface, and excitation mode is ...