Quad D-MOS Switch DC Motor Driver DSO28

  • RS-artikelnummer 826-8263
  • Tillv. art.nr BTM7740GXUMA1
  • Tillverkare / varumärke Infineon
Lagstiftning och ursprungsland
COO (Country of Origin): MY

Motor Driver ICs, Infineon

Infineon offer a variety of drivers that offer a solution for motor controls and drives. The selection includes Integrated Full-Bridge, Powertrain H-Bridge, TrilithIC, NovalithIC as well as Servo and Stepper motor drivers.The H-bridge is suited to applications such as DC brush motors. The TrilithIC integrates two high-side and two low-side switches which are meant to drive high-current DC motors in an H-bridge arrangement. Infineon’s single half-bridge drivers like NovalithIC are intended for automotive and industrial demands. Whereas the servo driver is widely used in head light beam control and the Stepper motor driver is for driving bipolar stepper motors.

Trilith ICs include overcurrent and over-temperature protection for the high-side switches
All Servo Drivers offer over temperature and over current protection as well as over and under voltage lockout except the TLE4205G (462-7823)

Motor Controllers & Drivers, Infineon

Attribute Value
Motor Type BLDC
Output Configuration Full Bridge
Maximum IGBT Collector Current 8A
Maximum Collector Emitter Voltage 40 V
Mounting Type Surface Mount
Package Type DSO
Pin Count 28
Maximum Operating Supply Voltage 42 V
Minimum Operating Supply Voltage 1.8 V
Typical Switching Frequency 1kHz
Length 18.1mm
Automotive Standard AEC-Q100
Dimensions 18.1 x 7.6 x 2.45mm
Height 2.45mm
Width 7.6mm
Minimum Operating Temperature -40 °C
Maximum Operating Temperature +150 °C
82 I lager för leverans inom 1 arbetsdagar
Pris (ex. moms) Each (In a Pack of 2)
38,205 kr
(exkl. moms)
47,756 kr
(inkl. moms)
Per unit
Per Pack*
2 +
38,205 kr
76,41 kr
Related Products
The ASA new electric screwdriver is featuring a ...
The ASA new electric screwdriver is featuring a new DC motor. The benefits of this new motor design are improved durability and a wider range of torque and rpm. This is due to the high-quality extra-strong magnet, low electric current ...
Designed for pulse-width-modulated (PWM) control of DC motors, ...
Designed for pulse-width-modulated (PWM) control of DC motors, the A5950 is capable of peak output currents up to ±3 A and operating voltages from 5.5V to 40 V. DC motors are controlled using standard PHASE and ENABLE signals to permit ...
The STSPIN240 is a dual brush DC motor driver integrating a low RDS(ON) power stage in a small QFN 3 x 3 mm package.Both the full-bridges implement an independent PWM current controller with fixed OFF time.The device is designed to ...
The IFX9201SG a general purpose 6A H-bridge for ...
The IFX9201SG a general purpose 6A H-bridge for industrial applications, home appliance and building automation, power tools battery management and medical applications, designed for the control of small DC motors and inductive loads is available from Infineon now. The outputs ...