Power Integrations BRD1265C-TL, AC Induction, BLDC Motor, PMSM Motor Motor Driver IC 24-Pin, InSOP-C
- RS-artikelnummer:
- 187-5425
- Tillv. art.nr:
- BRD1265C-TL
- Tillverkare / varumärke:
- Power Integrations
Tillfälligt slut i lager – restorder för leverans 2024-06-17
Lagt till varukorgen
Pris (ex. moms) Var (i ett paket med 5)
13,194 kr
(exkl. moms)
16,492 kr
(inkl. moms)
Enheter | Per unit | Per Pack* |
5 - 5 | 13,194 kr | 65,97 kr |
10 - 95 | 11,794 kr | 58,97 kr |
100 - 495 | 11,29 kr | 56,45 kr |
500 - 995 | 10,984 kr | 54,92 kr |
1000 + | 10,744 kr | 53,72 kr |
- RS-artikelnummer:
- 187-5425
- Tillv. art.nr:
- BRD1265C-TL
- Tillverkare / varumärke:
- Power Integrations
Datablad
Lagstiftning och ursprungsland
Produktdetaljer
Highest Performance and Design Flexibility
Fully integrated half-bridge stage with up to 98% efficiency
Eliminates external heat sink at rated continuous RMS current
600 V N-channel power FREDFETs
Ultra-soft, fast recovery diode
Accurate instantaneous phase current information output (BRD126X)
Eliminates external sensing and amplification circuitry
Self-biased low-side and high-side drivers
Eliminates need for auxiliary power supply
Small footprint surface mount inSOP-24C package
Exposed pads enable heat sinking through PCB
Controlled FREDFET switching speed reduces EMI
Adjustable cycle-by-cycle current limit for both FREDFETs
Fail-safe operation
Internal dual level thermal overload protection
Self-configuring system level monitoring input
Four level DC bus undervoltage
DC bus overvoltage
System temperature
Adaptive dead time
Simultaneous conduction lockout protection
Applications
2- or 3-phase high-voltage PM and BLDC motor drives
Up to 300 W typical inverter output power
Appliances including dish washers and refrigerators
Condenser fans in high efficiency air conditioners
Fully integrated half-bridge stage with up to 98% efficiency
Eliminates external heat sink at rated continuous RMS current
600 V N-channel power FREDFETs
Ultra-soft, fast recovery diode
Accurate instantaneous phase current information output (BRD126X)
Eliminates external sensing and amplification circuitry
Self-biased low-side and high-side drivers
Eliminates need for auxiliary power supply
Small footprint surface mount inSOP-24C package
Exposed pads enable heat sinking through PCB
Controlled FREDFET switching speed reduces EMI
Adjustable cycle-by-cycle current limit for both FREDFETs
Fail-safe operation
Internal dual level thermal overload protection
Self-configuring system level monitoring input
Four level DC bus undervoltage
DC bus overvoltage
System temperature
Adaptive dead time
Simultaneous conduction lockout protection
Applications
2- or 3-phase high-voltage PM and BLDC motor drives
Up to 300 W typical inverter output power
Appliances including dish washers and refrigerators
Condenser fans in high efficiency air conditioners
Specifikationer
Attribute | Value |
---|---|
Motor Type | AC Induction, BLDC Motor, PMSM Motor |
Configuration | H Bridge |
Output Configuration | Half Bridge |
Maximum Output Current | 5.5A |
Mounting Type | Surface Mount |
Package Type | InSOP-C |
Pin Count | 24 |
Typical Switching Frequency | 20kHz |
Series | BRD |
Product Length | 9.4mm |
Length | 9.4mm |
Maximum Operating Temperature | +150 °C |
Product Width | 10.8mm |
Minimum Operating Temperature | -40 °C |
Product Height | 1.45mm |
Dimensions | 9.4 x 10.8 x 1.45mm |
Height | 1.45mm |
Width | 10.8mm |
- RS-artikelnummer:
- 187-5425
- Tillv. art.nr:
- BRD1265C-TL
- Tillverkare / varumärke:
- Power Integrations