Infineon TCA3727GXUMA1, Stepper Motor Driver IC, 50 V 0.75A 24-Pin, DSO

  • RS-artikelnummer 166-0853
  • Tillv. art.nr TCA3727GXUMA1
  • Tillverkare / varumärke Infineon
Datablad
Lagstiftning och ursprungsland
RoHS-Försäkran
Produktdetaljer

Motor Driver ICs, Infineon

Infineon offer a variety of drivers that offer a solution for motor controls and drives. The selection includes Integrated Full-Bridge, Powertrain H-Bridge, TrilithIC, NovalithIC as well as Servo and Stepper motor drivers.The H-bridge is suited to applications such as DC brush motors. The TrilithIC integrates two high-side and two low-side switches which are meant to drive high-current DC motors in an H-bridge arrangement. Infineon’s single half-bridge drivers like NovalithIC are intended for automotive and industrial demands. Whereas the servo driver is widely used in head light beam control and the Stepper motor driver is for driving bipolar stepper motors.

Trilith ICs include overcurrent and over-temperature protection for the high-side switches
All Servo Drivers offer over temperature and over current protection as well as over and under voltage lockout except the TLE4205G (462-7823)

Motor Controllers & Drivers, Infineon

Specifikationer
Attribute Value
Motor Type Stepper
Output Configuration Dual Full Bridge
Maximum IGBT Collector Current 0.75A
Maximum Collector Emitter Voltage 50 V
Mounting Type Surface Mount
Package Type DSO
Pin Count 24
Maximum Operating Supply Voltage 50 V
Minimum Operating Supply Voltage 5 V
Width 7.6mm
Maximum Operating Temperature +150 °C
Height 2.45mm
Dimensions 15.6 x 7.6 x 2.45mm
Length 15.6mm
Tillfälligt slut i lager – restorder för leverans 2020-09-21
Pris (ex. moms) Each (On a Reel of 1000)
35,673 kr
(exkl. moms)
44,591 kr
(inkl. moms)
Enheter
Per unit
Per Reel*
1000 +
35,673 kr
35 673,00 kr
Related Products
Designed for pulse-width-modulated (PWM) control of DC motors, ...
Description:
Designed for pulse-width-modulated (PWM) control of DC motors, the A5950 is capable of peak output currents up to ±3 A and operating voltages from 5.5V to 40 V. DC motors are controlled using standard PHASE and ENABLE signals to permit ...
BD63720AEFV is a bipolar low-consumption driver that driven ...
Description:
BD63720AEFV is a bipolar low-consumption driver that driven by PWM current. Rated power supply voltage of the device is 36 V, and rated output current is 2.0 A. CLK-IN driving mode is adopted for input interface, and excitation mode is ...
High-side switches can safely drive high currents in ...
Description:
High-side switches can safely drive high currents in resistive, inductive and capacitive grounded loads. Designed to work in the harsh automotive environment they requires both robust, low on-resistance power switch and accurate analogue circuitry for diagnostic, protection and control functions. ...
The L298 from ST is an integrated high ...
Description:
The L298 from ST is an integrated high voltage, high current Dual Full-Bridge Driver. The device is designed to accept standard TTL logic and drive inductive loads in Relays, Solenoids, DC and Stepper Motors. Featured are two enable inputs that ...