ROHM BD63715AEFV-E2, Stepper Motor Driver IC 28-Pin, HTSSOP-B

  • RS-artikelnummer 146-7700
  • Tillv. art.nr BD63715AEFV-E2
  • Tillverkare / varumärke ROHM
Datablad
Lagstiftning och ursprungsland
RoHS-Försäkran
Produktdetaljer

BD63715AEFV is a bipolar low-consumption driver that driven by PWM current. Rated power supply voltage of the device is 36 V, and rated output current is 1.5 A. CLK-IN driving mode is adopted for input interface, and excitation mode is corresponding to FULL STEP mode, HALF STEP mode (2 types) and QUARTER STEP mode via a built-in DAC. In terms of current decay, the FAST DECAY/SLOW DECAY ratio may be set without any limitation, and all available modes may be controlled in the most appropriate way. In addition, the power supply may be driven by one single system, which simplifies the design

Specifikationer
Attribute Value
Motor Type Stepper
Output Configuration Half Bridge
Configuration H Bridge
Maximum Output Current 1.5 (Continuous) A, 2 (Peak) A
Maximum Supply Voltage 28 V
Mounting Type Surface Mount
Package Type HTSSOP-B
Pin Count 28
Maximum Operating Supply Voltage 28 V
Minimum Operating Supply Voltage 19 V
Series BD63715AEFV
Height 0.85mm
Product Length 9.7mm
Dimensions 9.7 x 4.4 x 0.85mm
Product Width 4.4mm
Minimum Operating Temperature -25 °C
Product Height 0.85mm
Length 9.7mm
Width 4.4mm
Maximum Operating Temperature +85 °C
I lager för leverans inom 2 arbetsdagar
Pris (ex. moms) Each (In a Pack of 5)
22,438 kr
(exkl. moms)
28,048 kr
(inkl. moms)
Enheter
Per unit
Per Pack*
5 - 10
22,438 kr
112,19 kr
15 - 25
20,39 kr
101,95 kr
30 - 55
19,77 kr
98,85 kr
60 - 245
19,294 kr
96,47 kr
250 +
18,756 kr
93,78 kr
Nästa dag-leverans inte möjlig
Förpackningsalternativ:
Related Products
High-side switches can safely drive high currents in ...
Description:
High-side switches can safely drive high currents in resistive, inductive and capacitive grounded loads. Designed to work in the harsh automotive environment they requires both robust, low on-resistance power switch and accurate analogue circuitry for diagnostic, protection and control functions. ...
The Control Integrated Power System (CIPOS) are families ...
Description:
The Control Integrated Power System (CIPOS) are families of highly integrated, compact power modules. They are designed to drive motors in home appliances, fan and pump applications. These energy-efficient Intelligent Power Modules (IPM) deliver increased power density with enhanced system ...
Integrated Haptic Driver ICs from Texas Instruments designed ...
Description:
Integrated Haptic Driver ICs from Texas Instruments designed to operate with LRA (Linear Resonance Actuator) and ERM (Eccentric Rotating Mass) devices. Haptic actuators create the sense of touch by generating motions, forces or vibrations which the user will detect and ...
Build-in Peripherals; HVIC, IGBT, FRD, Boot-Diode, Shunt Resistor, ...
Description:
Build-in Peripherals; HVIC, IGBT, FRD, Boot-Diode, Shunt Resistor, Gate Resistor and Thermistor for Inverter CircuitLow Loss by using Low VCE(sat) High Speed IGBTs, and Soft Recovery DiodesTemperature DetectionNoise ReductionReduce Surge VoltageSingle-In-Line Package (SIP) moduleApplications in Air Conditioner ...