STMicroelectronics STEVAL-SPIN3201 STEVAL BLDC Evaluation Board for STSPIN32F0 for STSPIN32F0

  • RS-artikelnummer 143-8868
  • Tillv. art.nr STEVAL-SPIN3201
  • Tillverkare / varumärke STMicroelectronics
Datablad
Lagstiftning och ursprungsland
RoHS-Försäkran
Produktdetaljer

STEVAL-SPIN3201 Advanced BLDC Controller Evaluation Board

The STEVAL-SPIN3201 board is a three-phase Brushless DC motor (BLDC) driver board based on the STSPIN32F0 motor controller with embedded STM32F0 MCU. The board is designed for sensored or sensorless vector control, FOC algorithms with 3-shunt sensing.

STSPIN32F0 Features

• 48MHz STM32 Cortex-M0 core MCU with 32KB Flash memory, 4KB SRAM • 3 x High/Low-Side 600mA MOSFET gate drivers
• Gate drivers feature bootstrap diodes and cross-conduction prevention
• +3.3V DC-DC buck converter regulator
• +12V LDO linear regulator
• 4 x op amps for signal conditioning
• 3FG open-drain output provides decoded result of inputs from 3 Hall sensors
• Comparator for overcurrent protection with programmable threshold
• On-chip debug support via SWD

STEVAL-SPIN3201 Board Features

• STSPIN32F0 BLDC Controller • 6 x STD140N6F7 60V 80A MOSFETs configured as 3 x half-bridges
• Maximum motor current: 14Arms
• On-board ST-LINK/V2-1 debug based on STM32F103CB MCU
• 3-shunt current sensing circuit
• Digital/Hall Encoder input circuit
• 100kΩ potentiometer for manual speed control
• 2 x User pushbuttons with LEDs
• Reset pushbutton
• Power LED
• ST-LINK status LEDs
• USB mini-B connector for host PC connection
• Supports STM32 PMSM FOC Software Development Kit (STSW-STM32100)
• Screw connectors for motor windings
• Screw connectors for +8 to +45Vdc motor power supply

Motor Controllers & Drivers, STMicroelectronics

Specifikationer
Attribute Value
Kit Name STEVAL
Kit Classification Evaluation Board
For Use With STSPIN32F0
Motor Type BLDC
Featured Device STSPIN32F0
10 I lager för leverans inom 1 arbetsdagar
Pris (ex. moms) Each
589,61 kr
(exkl. moms)
737,01 kr
(inkl. moms)
Enheter
Per unit
1 +
589,61 kr
Related Products
The STEVAL-IPMNG3Q is a compact 3-phase ac motor ...
Description:
The STEVAL-IPMNG3Q is a compact 3-phase ac motor driver board based on a SLLIMM™-nano (Small Low-Loss Intelligent Moulded Module) 2nd series device. It is designed for driving high-power motors in a wide range of applications such as white goods, air-conditioning, ...
The STEVAL-IPM08B compact motor drive power board is ...
Description:
The STEVAL-IPM08B compact motor drive power board is based on SLLIMM™ (small low-loss intelligent molded module) 2nd series module ( STGIB8CH60TS-L). It provides an affordable and easy-to-use solution for driving high power motors in a wide range of applications such ...
The LB1909MC is a low saturation voltage stepping ...
Description:
The LB1909MC is a low saturation voltage stepping motor driver IC. It is optimal for motor drivers in 12V system products. Current consumption 0 in standby modeThe compact package (MFP-10S) is adopted. VCC max = 20V, IO max = 0.8ABIP ...
LV8860V is a driver IC used for single-phase ...
Description:
LV8860V is a driver IC used for single-phase fan motor. High-efficiency and low-noise are realized by reducing reactive power using Silent PWM. The operating range of LV8860V is wide. LV8860V also corresponds to 24V. Therefore, it is optimal for office ...