Adafruit 2927 FeatherWing Add-On Board DC Add On Board for ATmega32u4, ATSAM M0, ESP8266 for All Feather Board

Datablad
Lagstiftning och ursprungsland
RoHS-Försäkran
Produktdetaljer

DC Motor / Stepper Motor FeatherWing

FeatherWings add specific functionality to your Feather development board. They fit directly on top of your Feather using stacking header pins.

The DC Motor / Stepper Motor FeatherWing enables you to add either two bi-polar stepper motors or four brushed DC motors to your Feather project. It uses the I2C (SDA & SCL pins) to control all the motor and speed controls.

You can stack up to 32 wings giving you a maximum of 64 steppers or 128 DC motors. Supported by the Arduino software library.

- 4 full H-Bridges with 1.2A per bridge complete with thermal shutdown protection, internal kickback protection diodes. Can run motors on 4.5 V dc to 13.5 V dc.
- Up to 4 bi-directional DC motors with individual 12-bit speed selection (roughly 0.02% resolution)
- Up to 2 stepper motors (unipolar or bipolar) with single coil, double coil, interleaved or micro-stepping.
- Motors automatically disabled on power-up
- 3.5 mm terminal block connectors (18-26 AWG)
- Polarity protected 2-pin terminal block and jumper to connect external power, for separate logic/motor supplies
- Board dimensions: 50.8 x 22.9 x 1.6 mm / 2" x 0.9" x 0.06"
- Weight: 4.6 g

Adafruit FeatherWing Add-On Boards

Specifikationer
Attribute Value
Kit Name FeatherWing Add-On Board
Kit Classification Add On Board
For Use With All Feather Board
Motor Type DC
Featured Device ATmega32u4, ATSAM M0, ESP8266
12 I lager för leverans inom 1 arbetsdagar
Pris (ex. moms) Each
183,96 kr
(exkl. moms)
229,95 kr
(inkl. moms)
Enheter
Per unit
1 +
183,96 kr
Related Products
The NB7V33M is a differential divide by 4 ...
Description:
The NB7V33M is a differential divide by 4 Clock divider with asynchronous reset. The differential Clock inputs incorporate internal 50-ohm termination resistors and will accept LVPECL, CML and LVDS logic levels. The NB7V33M produces a div 4 output copy of ...
The Si5317-EVB is intended for evaluating the high-performance ...
Description:
The Si5317-EVB is intended for evaluating the high-performance Si5317, 1:1 jitter-attenuating clock cleaner. Third generation DSPLL technology provides a PLL solution eliminating the need for an external voltage controlled crystal oscillator and loop filters. No software requiredDSPLL loop bandwidth is ...
Silicon Lab evaluation board Si5338-EVB will assess all ...
Description:
Silicon Lab evaluation board Si5338-EVB will assess all of the following Si5330/34/35/38 series of any frequency and any output quad clock generator and buffers. USB-poweredClockBuilder™ desktop configuration softwareGUI programmable supply voltages, VDDO 1.8, 2.5 and 3.3 VGUI controlled current, voltage ...
All CBEs have blade terminals and have an ...
Description:
All CBEs have blade terminals and have an insulation resistance greater than 100MΩ (MegaOhms). Single pole magnetic hydraulic CBE with trip free snap action mechanism with toggle actuation.Industry standard dimensions with medium delay for most applications.Typically used on control equipment, ...