ON Semiconductor NCP5106BDR2G Dual MOSFET Power Driver, 500mA 8-Pin, SOIC

  • RS-artikelnummer 186-9805
  • Tillv. art.nr NCP5106BDR2G
  • Tillverkare / varumärke ON Semiconductor
Datablad
Lagstiftning och ursprungsland
RoHS-Försäkran
Produktdetaljer

MOSFET & IGBT Drivers, ON Semiconductor

Power drivers for MOSFET and IGBT in low side, high side, and half-bridge circuits.

High Voltage Range: Up to 600 V
dV/dt Immunity ± 50 V/nsec
Gate Drive Supply Range from 10 V to 20 V
High and Low Drive Outputs
Output Source / Sink Current Capability 250 mA / 500 mA
3.3 V and 5 V Input Logic Compatible
Up to Vcc Swing on Input Pins
Matched Propagation Delays Between Both Channels
Outputs in Phase with the Inputs
Independent Logic Inputs to Accommodate All Topologies (Version A)
Cross Conduction Protection with 100 ns Internal Fixed Dead Time (Version B )
Under Vcc LockOut (UVLO) for Both Channels
Pin-to-Pin Compatible with Industry Standards
Applications
Half-Bridge Power Converters
Any Complementary Drive Converters (Asymmetrical Half-Bridge, Active Clamp) (A version only).
Full-Bridge Converters

MOSFET & IGBT Drivers, ON Semiconductor

Specifikationer
Attribute Value
Number of Drivers 2
Minimum Operating Supply Voltage 10 V
Maximum Operating Supply Voltage 20 V
Mounting Type Surface Mount
Peak Output Current 500mA
Number of Outputs 2
Package Type SOIC
Pin Count 8
High and Low Sides Dependency Independent
Width 4mm
Height 1.5mm
Dimensions 5 x 4 x 1.5mm
Input Bias Current 25µA
Minimum Operating Temperature -40 °C
Rise Time 160ns
Fall Time 75ns
Length 5mm
Time Delay 170ns
Maximum Operating Temperature +125 °C
Tillfälligt slut i lager – restorder för leverans 2021-03-03
Pris (ex. moms) Each (In a Pack of 10)
7,497 kr
(exkl. moms)
9,371 kr
(inkl. moms)
Enheter
Per unit
Per Pack*
10 - 40
7,497 kr
74,97 kr
50 - 90
7,341 kr
73,41 kr
100 - 240
5,77 kr
57,70 kr
250 - 990
5,656 kr
56,56 kr
1000 +
4,022 kr
40,22 kr
Förpackningsalternativ:
Related Products
The HIP2103-4DEMO1Z Demonstration Board, is a general purpose ...
Description:
The HIP2103-4DEMO1Z Demonstration Board, is a general purpose motor drive module with a microprocessor controller on-board. It uses a PIC microcontroller to control the HIP2103 and the HIP2104 half bridge drivers with six MOSFETs.The HIP2103-4DEMO2Z Demonstration Board integrates the HIP2103 ...
3-phase 600V MOSFET and IGBT gate driver ICs ...
Description:
3-phase 600V MOSFET and IGBT gate driver ICs from Infineon based on proven existing SOI-technology. The absence of parasitic thyristor structures in these rugged devices prevents latch-up under all normal operating conditions. The drivers include under-voltage over-current detection and can ...
The MCP14A0303/4/5 devices are dual output high-speed MOSFET ...
Description:
The MCP14A0303/4/5 devices are dual output high-speed MOSFET drivers that are capable of providing up to 3.0A of peak current while operating from a single 4.5V to 18V supply. There are three output configurations available: inverting (MCP14A0303), non-inverting (MCP14A0304), and ...
The MIC4103 and MIC4104 are high frequency, 100V ...
Description:
The MIC4103 and MIC4104 are high frequency, 100V Half Bridge MOSFET drivers with faster turn-off characteristics than the MIC4100 and MIC4101 drivers. They feature fast 24ns propagation delay times and 6ns driver fall times. Asymmetrical, low impedance outputs drive 1000pF ...