- RS-artikelnummer:
- 146-2395
- Tillv. art.nr:
- HIP2103FRTAAZ-T7A
- Tillverkare / varumärke:
- Intersil
Tyvärr har vi inte denna produkt i lager.
Restorder ej möjlig på grund av bristande allokering. Den evt. angivna systemtekniska leveranstiden är inte giltig.
Pris (ex. moms) Var (i en rulle med 250)
12,225 kr
(exkl. moms)
15,281 kr
(inkl. moms)
Enheter | Per unit | Per Reel* |
250 + | 12,225 kr | 3 056,25 kr |
- RS-artikelnummer:
- 146-2395
- Tillv. art.nr:
- HIP2103FRTAAZ-T7A
- Tillverkare / varumärke:
- Intersil
Lagstiftning och ursprungsland
- COO (Country of Origin):
- US
Produktdetaljer
HIP2103/HIP2104, 3-Phase, Half Bridge Motor Drivers, Intersil
The HIP2103-4DEMO1Z Demonstration Board, is a general purpose motor drive module with a microprocessor controller on-board. It uses a PIC microcontroller to control the HIP2103 and the HIP2104 half bridge drivers with six MOSFETs.
The HIP2103-4DEMO2Z Demonstration Board integrates the HIP2103 and the HIP2104 half bridge drivers which control six on-board MOSFETs configured as a 3-phase bridge. Two inputs per a phase are provided to control independently the high side driver and the low side driver.
The boards are designed for Full, or Half Bridge brushed DC motors and 3-phase brushless DC (BLDC) motor applications. It can be used in any application that requires any combination of three independent half bridges.
The HIP2103-4DEMO2Z Demonstration Board integrates the HIP2103 and the HIP2104 half bridge drivers which control six on-board MOSFETs configured as a 3-phase bridge. Two inputs per a phase are provided to control independently the high side driver and the low side driver.
The boards are designed for Full, or Half Bridge brushed DC motors and 3-phase brushless DC (BLDC) motor applications. It can be used in any application that requires any combination of three independent half bridges.
HIP2103-4DEMO1Z
MOSFET bridge supply voltage up to 60 V
3.3 V and 12 V LDO voltage regulators with dedicated enable pins (HIP2104)
Sleep mode quiescent current: 5 μA
Under Voltage-Lockout (UVLO): 4 V
3.3 V or 5 V CMOS compatible inputs with hysteresis
High current MOSFETs with integrated bootstrap diode
3.3 V and 12 V LDO voltage regulators with dedicated enable pins (HIP2104)
Sleep mode quiescent current: 5 μA
Under Voltage-Lockout (UVLO): 4 V
3.3 V or 5 V CMOS compatible inputs with hysteresis
High current MOSFETs with integrated bootstrap diode
HIP2103-4DEMO2Z
MOSFET bridge supply voltage from 5 V to 40 V dc
High current MOSFETs on-board with integrated bootstrap diode
Large diameter holes for wire connections to motor and power source
12-pin through-hole header for signal connections to an external controller
Optional heatsink can be accommodated on the PCB back-side
High current MOSFETs on-board with integrated bootstrap diode
Large diameter holes for wire connections to motor and power source
12-pin through-hole header for signal connections to an external controller
Optional heatsink can be accommodated on the PCB back-side
Motor Controllers & Drivers, Intersil
Specifikationer
Attribute | Value |
---|---|
Logic Type | CMOS |
Output Current | 75 mA |
Supply Voltage | 14V |
Pin Count | 8 |
Fall Time | 30ns |
Package Type | TDFN |
Number of Outputs | 2 |
Rise Time | 35ns |
Topology | Half Bridge |
High and Low Sides Dependency | Independent |
Number of Drivers | 2 |
Bridge Type | Half Bridge |
Polarity | Non-Inverting |
Mounting Type | Surface Mount |