ABB Temperature Monitoring Relay With SPDT Contacts, 24 V ac/dc

  • RS-artikelnummer 876-4991
  • Tillv. art.nr 1SVR740700R0100
  • Tillverkare / varumärke ABB
Datablad
Lagstiftning och ursprungsland
RoHS-Försäkran
Produktdetaljer

CM-MSS Thermistor Motor Protection Relays

Heavy duty starting
Increased switching frequency
High ambient temperature
Insufficient cooling
Break operation
Unbalance

The CM range of thermistor motor protection relays are used to control motors equipped with PTC temperature sensors. The PTC temperature sensors are incorporated in the motor windings to measure the motor heating. This enables direct control and evaluation of the following operating conditions:

Main features include:
Dynamic interrupted wire detection
Wide control supply voltage rang 24-240 V AC/DC
Short circuit monitoring of the sensor circuit
Non-volatile fault storage
Remote reset
Screw connection technology or Easy Connect Technology available

Single Sensor Input Version
Wire Break Detection

Technical Specification
Manufacturer Part No. Supply Voltage Output Manual Reset Remote Reset Test Button Stock Number
1SVR430800R9100 24Vac/dc 1NO No No No 464-518
1SVR430801R1100 220-240Vac 1NO No No No 464-520
1SVR430810R9300 24Vac/dc 2CO Yes Yes No 464-570
1SVR430811R0300 110-130Vac 2CO Yes Yes No 464-574
1SVR430811R1300 220-240Vac 2CO Yes Yes No 464-568
1SVR430711R0300 110-130Vac 2CO Yes Yes Yes 464-564
1SVR430711R2300 380-440Vac 2CO Yes Yes Yes 464-558
1SVR430720R0400 24-240Vac/dc 1NO 1NC Yes Yes Yes 464-552
1SVR430720R0300 24-240Vac/dc 2CO Yes Yes Yes 464-546

Approvals

Some products also have the ATEX approval for the use in hazardous areas.

Specifikationer
Attribute Value
Monitoring Application Temperature
Supply Voltage 24 V ac/dc
Contact Configuration SPDT
Time Delay <100 ms
Temperature Sensitivity Overtemperature, Winding Temperature
Current Range Maximum of 3.7 mA
Minimum Operating Temperature -25°C
Dimensions 103.7 x 22.5 x 85.6 mm
Special Features Automatic Reset, Fail-Safe, Inbuilt PTC Sensor, Insufficient Cooling Protection, One Measuring Circuit, Over Heating Protection, Over Load Protection
Standards Met CB Scheme, CCC, CE, CULus, EAC, EMC, GL, IEC/EN 60255-1, IEC/EN 60947-8, RCM, RoHS
Series CM-MSS
Length 103.7mm
Width 22.5mm
Operating Temperature Range -25 +60 °C
Height 85.6mm
Number of Poles 1
Maximum Operating Temperature +60°C
Mounting Type DIN Rail, Snap-In
Terminal Type Push In
1 I lager för leverans inom 1 arbetsdagar
Pris (ex. moms) Each
581,63 kr
(exkl. moms)
727,04 kr
(inkl. moms)
Enheter
Per unit
1 +
581,63 kr
Related Products
iTL impulse relays are used to control by ...
Description:
iTL impulse relays are used to control by pushbuttons lighting circuits consisting of incandescent lamps, low-voltage halogen lamps, fluorescent lamps and discharge lamps. Closing of the impulse relay pole is triggered by an impulse on the coilHaving two stable mechanical ...
TELE GAMMA series AC and DC voltage monitoring ...
Description:
TELE GAMMA series AC and DC voltage monitoring relay. Multifunction monitoring in a slim easy to use package. The GAMMA series have a self-extinguishing plastic body with an IP rating of IP40. DIN Rail mountLED indicatorScrew terminals2 change over contactMultifunction. ...
Thermistor motor protection relay Standard evaluation unit 22.5 ...
Description:
Thermistor motor protection relay Standard evaluation unit 22.5 mm enclosure screw terminal 2 change-over contacts US = 24 V-240 V AC/DC Manul/Remote-Reset with ATEX approval 2 LEDs (READY/TRIPPED) galvanic isolation Test/reset button Wire break monitoring Short circuit monitoring.
The control of AC and DC voltage0.2V to ...
Description:
The control of AC and DC voltage0.2V to 60V (EUL) and 10 to 600V (EUH) measurement rangesSelection of over-voltage and under-voltage, by means of a dip switchDelay on threshold over-run 0.1s to 3s.