Carlo Gavazzi Current Monitoring Relay With SPDT Contacts, 1 Phase, 24 V dc, 24 → 240 V ac

  • RS-artikelnummer 857-7703
  • Tillv. art.nr DIB01CM24100A
  • Tillverkare / varumärke Carlo Gavazzi
Datablad
Lagstiftning och ursprungsland
RoHS-Försäkran
COO (Country of Origin): IT
Produktdetaljer

Over Voltage - Over Current Monitoring Relay

Monitoring relays from Carlo Gavazzi can also be used as 1-phase or 3- phase over current monitoring relays when connected with MI or MP current transformers.Owing to the built-in latch function, the ON-position of the relay output can be maintained. The red LED indicates the alarm status.

AC/DC over voltage monitoring relay
Selection of measuring range by DIP-switches
Measuring ranges: 2 to 20 VAC/DC, 5 to 50 VAC/DC,
20 to 200 VAC/DC, 50 to 500 VAC/DC, 0.4 to 4 Vp AC
Adjustable voltage limit on relative scale
Adjustable hysteresis
Programmable latching at set level
Output: 8 A SPDT relay normally de-energized
LED indication for relay and power supply ON
Galvanically separated power supply
Panel and screw termination options available

Specifikationer
Attribute Value
Monitoring Application Current
Supply Voltage 24 V dc, 24 → 240 V ac
Contact Configuration SPDT
Electrical Phase 1
Current Sensitivity Overcurrent
Time Delay 1 s, 6 s
Width 99.5mm
Current Range 2 → 100 A ac
Operating Temperature Range -20 → +60 °C
Minimum Operating Temperature -20°C
Dimensions 22.5 x 99.5 x 83.5 mm
Maximum Operating Temperature +60°C
Height 83.5mm
Length 22.5mm
9 I lager för leverans inom 1 arbetsdagar
Pris (ex. moms) Each
2 739,01 kr
(exkl. moms)
3 423,76 kr
(inkl. moms)
Enheter
Per unit
1 +
2 739,01 kr
Relaterte Produkter
Omron K8DT-AS/AW single phase current relays detect errors ...
Description:
Omron K8DT-AS/AW single phase current relays detect errors in motors and other equipment through current changes. Monitor AC or DC currents with one Relay.Use with commercially available current transformersWidth of 17.5 mm to reduce space required in panels.Push-In Plus Terminal ...
Thermistor motor protection relay Compact evaluation unit 17.5 ...
Description:
Thermistor motor protection relay Compact evaluation unit 17.5 mm enclosure Screw terminal 1 NO contact, 1 NC contact US = 24 V-240 V AC/DC Auto RESET suitable for bimetallic switch 2 LEDs (Ready/Tripped) galvanic isolation.
Siemens 3UG range of level monitoring relays for ...
Description:
Siemens 3UG range of level monitoring relays for conductive liquids with screw terminals. To be used with 2 or 3 pole sensors. Comprising of 1 yellow LED for indicating the relay state and 1 green LED for indicating the applied ...
Depending on the configuration, the voltage monitoring relays ...
Description:
Depending on the configuration, the voltage monitoring relays CM-ESS.1 and CM-ESS.2 can be used for over- or undervoltage monitoring in single-phase AC and/or DC systems. The voltage to be monitored (measured value) is applied to terminals B-C. The devices work ...