Omron Voltage Monitoring Relay With SPDT Contacts, 1 Phase, 24 V ac/dc

  • RS-artikelnummer 819-3286
  • Tillv. K8AK-VS2 24VAC/DC
  • Tillverkare / varumärke Omron
Lagstiftning och ursprungsland

Omron K8AK-VS/VW Monitoring Relays

Manual resetting and automatically resetting supported by one relay
Pre-alarm monitoring mode
Compact housings
Resistant to high-frequency noise
Compliance with global power and safety standards

The Omron K8AK series monitoring relays are expertly designed for accurate and reliable monitoring of industrial facilities and equipment. The K8AK-VW/VS relays are ideal for monitoring overvoltages and undervoltages, which the K8AK-VW can do simultaneously.




K8AK-VS2 Monitoring Relay.

Monitors over and under voltages. Manual reset and auto resetting supported by 1 relay. One SPDT output relay. 5 A at 250 V ac (resistive load) Can be normally closed or normally open. NC/NO. LED output status indicator. Process control signal (0 to 10 V) current splitter input supported. Input frequency 40 Hz to 500 Hz Inputs isolated from the power supply

K8AK-VS2 24 VAC/DC Model.

Monitoring Relay. Power supply 24 V ac/dc. Setting range 1 to 10 V ac/dc, 3 to 30 V ac/dc, 15 to 150 V ac.dc.

Features and Benefits.

Power supply (isolated) 24 V ac/dc, 100 to 240 V ac. Manual/ Automatic reset (switchable) Manual reset – Turn OFF the power supply for minimum of 1 sec. Power on lock time 1 s or 5 s (using DIP switch) Green LED Power (PWR) Yellow LED Relay output (RY) Red LED Relay output (ALM) One SPDT relay (NO/NC) using DIP switch DIN Rail Mounted Weight 150 g Case material PC and ABS, UL 94 V-0 Colour N1.5 Protection IP20

What is a Monitoring / Measuring Relay?

A monitoring / measuring relay is a protective control device, various types are available suiting what you wish to monitor. The relays receive input signals then monitor them and then output an alarm signal when a set value is reached (alarm relays). The relays protect your equipment against over voltage and over current faults. Monitoring relays monitor AC power supplies, voltage and current, analogue signals detecting unusual activity in equipment against set alarm thresholds.

Types of Monitoring Relays Available?

Motor protection relays Temperature monitoring relays Water level control relays Voltage Current


UL 60947-5-1, UL 508, IP 20

Attribute Value
Monitoring Application Voltage
Supply Voltage 24 V ac/dc
Contact Configuration SPDT
Voltage Sensitivity Overvoltage, Undervoltage
Electrical Phase 1
Voltage Sensing Range 1 10 V ac/dc, 3 30 V ac/dc, 15 150 V ac/dc
Time Delay 0.1 30 s
Maximum Operating Temperature +60°C
Height 95mm
Maximum Voltage Sensed 10 V ac/dc, 30 V ac/dc, 150 V ac/dc
Operating Temperature Range -20 +60 °C
Minimum Voltage Sensed 1 V ac/dc, 3 V ac/dc, 15 V ac/dc
Length 22.5mm
Width 100mm
Dimensions 22.5 x 100 x 95 mm
Series K8AK-VS
Minimum Operating Temperature -20°C
14 I lager för leverans inom 1 arbetsdagar
Pris (ex. moms) Each
1 140,00 kr
(exkl. moms)
1 425,00 kr
(inkl. moms)
Per unit
1 +
1 140,00 kr
Related Products
Omron K8DT-AS/AW single phase current relays detect errors ...
Omron K8DT-AS/AW single phase current relays detect errors in motors and other equipment through current changes. Monitor AC or DC currents with one Relay.Use with commercially available current transformersWidth of 17.5 mm to reduce space required in panels.Push-In Plus Terminal ...
TELE KAPPA series AC and DC voltage monitoring ...
TELE KAPPA series AC and DC voltage monitoring relay. Multifunction monitoring in a slim easy to use package. The KAPPA series have a self-extinguishing plastic body with an IP rating of IP40. DIN Rail mountLED indicatorScrew terminals2 change over contactMultifunction. ...
Threshold and hysteresis separately adjustableSelection of over-current or ...
Threshold and hysteresis separately adjustableSelection of over-current or under-current by means of a dip switch(Operating range quoted is relative to nominal supply voltage (Un) ).
The control of AC and DC voltage0.2V to ...
The control of AC and DC voltage0.2V to 60V (EUL) and 10 to 600V (EUH) measurement rangesSelection of over-voltage and under-voltage, by means of a dip switchDelay on threshold over-run 0.1s to 3s.