- RS-artikelnummer:
- 181-2788
- Tillv. art.nr:
- MK9055N.12 1-120.000IPM UH=AC230V+DC24V
- Tillverkare / varumärke:
- Dold
1 I lager för avsändande samma dag
Nästa dag-leverans inte möjlig
Lagt till varukorgen
Pris (ex. moms) Varje
2 753,93 kr
(exkl. moms)
3 442,41 kr
(inkl. moms)
Enheter | Per unit |
1 + | 2 753,93 kr |
- RS-artikelnummer:
- 181-2788
- Tillv. art.nr:
- MK9055N.12 1-120.000IPM UH=AC230V+DC24V
- Tillverkare / varumärke:
- Dold
Datablad
Lagstiftning och ursprungsland
- COO (Country of Origin):
- DE
Produktdetaljer
Detection of high or low-rpm / stand still (adjustable function)
Large setting range 1 ... 120.000 IPM or 0.15 ... 20.000 Hz (10 ranges each)
As option with input for NAMUR-sensors with sensor and wire protection against interruption and short circuit
Adjustable hysteresis 0.5 ... 50 %
Adjustable start up time delay 0 ... 50 s, control with external contact
Adjustable monitoring time for missing input signal at function over frequency, additional using as standstill level
Programmable via terminals:
Alarm delay of 0 ... 100 s
with manual reset or auto reset
LED-indication for auxiliary voltage, measuring input and output relay, additional LED for indication of wire- / sensor failure at NAMUR-input
Auxiliary voltages AC 230 V and DC 24 V in one unit
2 changeover contacts, closed circuit operation
Open circuit operation on request
As option with analogue output, proportionally to speed
Device available with 2 response values and separately controlled output relays for under- and over frequency see
MK 9055N/5_ _
MH 9055 with wide input range for auxiliary voltage (AC/DC 24 ... 60 V or AC/DC 110 ... 230 V)
Large setting range 1 ... 120.000 IPM or 0.15 ... 20.000 Hz (10 ranges each)
As option with input for NAMUR-sensors with sensor and wire protection against interruption and short circuit
Adjustable hysteresis 0.5 ... 50 %
Adjustable start up time delay 0 ... 50 s, control with external contact
Adjustable monitoring time for missing input signal at function over frequency, additional using as standstill level
Programmable via terminals:
Alarm delay of 0 ... 100 s
with manual reset or auto reset
LED-indication for auxiliary voltage, measuring input and output relay, additional LED for indication of wire- / sensor failure at NAMUR-input
Auxiliary voltages AC 230 V and DC 24 V in one unit
2 changeover contacts, closed circuit operation
Open circuit operation on request
As option with analogue output, proportionally to speed
Device available with 2 response values and separately controlled output relays for under- and over frequency see
MK 9055N/5_ _
MH 9055 with wide input range for auxiliary voltage (AC/DC 24 ... 60 V or AC/DC 110 ... 230 V)
Specifikationer
Attribute | Value |
---|---|
Monitoring Application | Speed |
Contact Configuration | DPDT |
Mounting Type | DIN Rail |
Time Delay | 0 → 100s |
Frequency Sensing Range | 0.15 → 20Hz |
Series | MK9055N |
Dimensions | 97 x 22.5 x 90mm |
Minimum Operating Temperature | -20°C |
Maximum Operating Temperature | +60°C |
Width | 22.5mm |
Length | 97mm |
Maximum Frequency Sensed | 20Hz |
Terminal Type | Screw |
Operating Temperature Range | +60°C |
Minimum Frequency Sensed | 0.15Hz |
Height | 90mm |