Hi-Bond HB 720A Conductive Copper Tape, 12mm x 33m

  • RS-artikelnummer 832-6316
  • Tillv. art.nr HB 720A 12mm x 33m
  • Tillverkare / varumärke Hi-Bond
Datablad
Lagstiftning och ursprungsland
Ej tillämpbart
COO (Country of Origin): KR
Produktdetaljer

Hi-Bond Copper Foil Tape

The Hi-Bond copper foil tape has a conductive acrylic pressure-sensitive adhesive with a uniform dispersion of conductive particles of nickel silver. This tape is 0.07mm thick, 12mm wide and 33m long. The foil carrier is 25μ thick, with an additional 40-micron thick coating of acrylic adhesive containing nickel silver conductive particles.

Features and Benefits

Copper foil (25μm/.001in)
Release liner
Operating temperature ranges between -30°C and 130°C
Peel strength is 1.6lb/in
Tensile strength is 43N/cm

Applications

Electro-magnetic compatibility
Shielding
Radio frequency insulation
Earthling and static electric control
Shielding of signal cable
Shielding signal cable or FCC repairs
Blinding the end of knitted wire mesh of shielding cable
Shield leaking or invading electromagnetic waves
Tape for EMR/RFI shielding

Specifikationer
Attribute Value
Total Thickness 0.07mm
Tape Type Copper Tape
Foil Thickness 0.035mm
Width 12mm
Length 33m
Conductivity Conductive
Adhesion Strength 2.7 N/cm
Adhesive Material Acrylic
Material Plating None
Tensile Strength 43N/cm
Maximum Temperature Resistance +130°C
Minimum Temperature Resistance -30°C
Model Number HB 720A
393 I lager för leverans inom 1 arbetsdagar
Pris (ex. moms) Each
169,38 kr
(exkl. moms)
211,72 kr
(inkl. moms)
Enheter
Per unit
1 +
169,38 kr
Related Products
A very specific strip tape based on a ...
Description:
A very specific strip tape based on a 35 mircon tin clad copper foil coated with an electrically conductive acrylic adhesive and a removable polyester masking tape. Applied on to the inner door sections of electronic cabinets prior to powder ...
The Copper foil shielding tape 1182, has a ...
Description:
The Copper foil shielding tape 1182, has a 1.4-mil copper foil backing, a conductive acrylic pressure sensitive adhesive on both sides, and a liner. EMI Copper foil shielding tapeDeadsoft 1-ounce copper foil backingDouble-coated conductive adhesive makes an excellent conductive gasket. ...
The copper foil shielding tape 1194, has a ...
Description:
The copper foil shielding tape 1194, has a 1.4-mil smooth copper foil backing and a non-conductive acrylic pressure sensitive adhesive and liner. This makes them ideal for applications where a tape which does not drain the static charge to a ...
The 1345 type EMI shielding tape has a ...
Description:
The 1345 type EMI shielding tape has a 1.4-mil embossed tin plated copper foil backing with an acrylic pressure sensitive adhesive and liner. The embossing helps make an excellent contact through the adhesive. The tin plating helps with soldering and ...