Microchip AC243008, Serial SuperFlash(R) Kit 2 Serial Flash Evaluation Board for DM240001, DM240001-2

  • RS-artikelnummer 165-5117
  • Tillv. art.nr AC243008
  • Tillverkare / varumärke Microchip
Datablad
Lagstiftning och ursprungsland
RoHS-Försäkran
Produktdetaljer

The Serial SuperFlash® Kit 2 allows evaluation of Microchip's Serial Flash Devices which are made using the SST SuperFlash® technology. The Serial SuperFlash Kit 2 contains three Serial Flash Daughter Boards. The Serial Flash Daughter Board is an evaluation board designed to interface with the mikroBUS™ connector on the Explorer 16/32 Development Board (DM240001-2). It can also interface with the PICtail™ Plus connector located on the Explorer 16 Development Board (DM240001).

3-pin header provides easy access for the external power supply and power measurement capability
Plugs into the mikroBUS connector of the Explorer 16/32 Development Board
Plugs into the PICtail Plus connector of the Explorer 16 Development BoardFollows published recommended usage, including decoupling capacitors

Specifikationer
Attribute Value
Memory Technology Serial Flash
Kit Classification Evaluation Board
For Use With Explorer 16 Development Board (DM240001), Explorer 16/32 Development Board (DM240001-2)
Featured Device DM240001, DM240001-2
Kit Name Serial SuperFlash(R) Kit 2
5 I lager för leverans inom 1 arbetsdagar
Pris (ex. moms) Each
484,33 kr
(exkl. moms)
605,41 kr
(inkl. moms)
Enheter
Per unit
1 +
484,33 kr
Related Products
2.5kV fully isolated (power and data) RS-232 transceiverConvenient ...
Description:
2.5kV fully isolated (power and data) RS-232 transceiverConvenient connections for power and signal through screw terminal blocks5V power supply operationEasily configurable through jumper connectionsTest points for measuring all signalsAll external components required for correct operationPatchwork area supports ...
The EEPROM3 click is an add-on board for ...
Description:
The EEPROM3 click is an add-on board for storing initialisation and configuration data of your application. The Atmel AT24CM02 device is a 2Mbit Electrically Erasable PROgrammable Memory (EEPROM) organised as 262144 x 8 bits of memory, accessed through the I²C ...
The EEPROM click is an accessory board for ...
Description:
The EEPROM click is an accessory board for adding EEPROM (Electrically Erasable PROgrammable Memory) memory. It features the 24C08WP, a highly reliable, high performance, CMOS technology 8 Kbit serial I²C bus EEPROM in a DIP package. The module is compact ...
The Flash Click is an accessory board for ...
Description:
The Flash Click is an accessory board for adding flash memory. It features EN25F80 with 8 Mbit serial Flash memory module and advanced hardware write-protection mechanisms. It supports high-performance commands for clock frequency up to 75 MHz. The memory is ...