Telemecanique Sensors XY2CZ705 Cable Support, For Use With XY2C Rope Pull Switch

Datablad
Lagstiftning och ursprungsland
Ej tillämpbart
COO (Country of Origin): FR
Produktdetaljer

Telemecanique XY2CZ Rope Pull Accessories

Cables (galvanised with a red sheath)

A range of accessories to support the Preventa XY2C rope pull switches.

3.2mm dia. 609-1967, 609-1973, 609-1989 & 609-1995 for use with XY2CJ and XY2CH
5mm dia. 609-1945 & 609-1951 for use with XY2CE

Tensioner

837-1186 for use with XY2CJ

Turnbuckles

M6 x 60 + locknut, 251-2612 for use with all models
M8 x 70 + locknut, 609-2005 for use with all models

Cable Grips

Single, 305-1297 for use with 3 to 5mm diameter cable
Double, 305-1304 for use with 3 to 5mm diameter cable

Cable Supports

Fixed 251-2606 for use with all models
Pulley support 305-1354 for use with all models

End Spring

609-2011 for use with XY2CJ and XY2CH

Specifikationer
Attribute Value
Accessory Type Cable Support
For Use With XY2C Rope Pull Switch
Finns i lager och skickas samma dag vid order före kl 17 vardagar (fredagar före 16.00)
Pris (ex. moms) Each
137,52 kr
(exkl. moms)
171,90 kr
(inkl. moms)
Enheter
Per unit
1 - 9
137,52 kr
10 - 14
131,90 kr
15 +
126,14 kr
Nästa dag-leverans inte möjlig
Related Products
Even under extreme conditions, such as major temperature ...
Description:
Even under extreme conditions, such as major temperature fluctuations, the SRM rope pull switch continues to work reliably. Rope pull switch manufactured in accordance with DIN EN 60947-5-5 and DIN EN ISO 13850Protection class IP67Stable and durable metal housing (aluminium ...
Smallest designActuation only possible with BPS260, available separatelyLeft-hand ...
Description:
Smallest designActuation only possible with BPS260, available separatelyLeft-hand or right-hand side versions for door-mountingControl category up to 4 to EN954-1IP67 protection Connector 8 mm, 6-pole, latching interlockingDimensions: L13 x W26 x H36 mm.
The M4000 2 and 3 beam devices are ...
Description:
The M4000 2 and 3 beam devices are used for perimeter and access guarding where the hazard is considered high risk, requiring a safety device according to EN954 Category 4. The M4000 is certified according to IEC 61508 SIL3 and ...
The Idec actuator has two entry slots which ...
Description:
The Idec actuator has two entry slots which provide flexibility for installation. Its integral cable design minimizes wiring which prevents wiring mistakes. The mounting can be done in two directions. It can be used with HS6 Subminiature Interlock Switches. • ...