Honeywell Limit Switch Lever for use with LSZ59 Series

  • RS-artikelnummer 623-7028
  • Tillv. art.nr LSZ69CA
  • Tillverkare / varumärke Honeywell
Datablad
Lagstiftning och ursprungsland
RoHS-Försäkran
Produktdetaljer

Maintained Contact, Spoke Actuator Limit Switch

This spoke actuator switch is used to detect a transient target and remember its position.
The target passes through the spoke rotating the spoke by a quarter turn. This toggles the switch, normally a closed circuit, from ON to OFF. If another target transitions through the spoke, it will again toggle the switch this time from OFF to ON. Alternatively, the target can return back through the spoke again toggling the switch from OFF to ON. The spoke once rotated will maintain its position until it is moved to a new section - this is unlike normal limit switch actuation which normally will want to return to its rest position - with this switch there are 4 rest positions at each 90° points in a 360° rotation.
The tip over point is at 60° at which point the spoke will rotate to the next segment position.

Standards

EN60947-5-1, IEC947-5-1

Approvals

UL, CSA

//media.rs-online.com/t_line/L193199-02.gif
//media.rs-online.com/t_line/L193202-01.gif
Specifikationer
Attribute Value
Accessory Type Lever
For Use With LSZ59 Series
17 I lager för leverans inom 1 arbetsdagar
Pris (ex. moms) Each
330,19 kr
(exkl. moms)
412,74 kr
(inkl. moms)
Enheter
Per unit
1 - 4
330,19 kr
5 - 14
316,78 kr
15 +
306,41 kr
Related Products
The fuserbloc series are manually operated multi polar ...
Description:
The fuserbloc series are manually operated multi polar fuse combination switches. These fused switch disconnectors break or switch off on load and provide safety isolation and protection against over current for any low voltage electrical circuit. The fuserbloc series is ...
This range of easy to use limit switches ...
Description:
This range of easy to use limit switches by Eaton offer a variety of compact safety position switches to suit worldwide application. • Eaton's limit switch has an IP66 protection rating in plastic bodies• Operating heads can be installed in ...
Complete limit switch assemblies can be constructed using ...
Description:
Complete limit switch assemblies can be constructed using ZCKJ limit bodies and ZCKE/Y limit switch heads and actuatorsRated 240V 3A at AC15 10A IthSnap action NC contacts with positive opening operation-25 to +70°C operating temperatureProtected to IP66.
Metal encapsulated (IP67)Very robustArduous environment suited e.g. earth ...
Description:
Metal encapsulated (IP67)Very robustArduous environment suited e.g. earth moving equipment, machine tools, refuse vehicles, Manufacturing/ process linesBottom/side entry options available1 & 2 metre cable and M12 4 pin connection options.