Cynergy3 ILSE Series Pressure Level Transmitter, 4-20mA Output, Chassis Mount, 303 Stainless Steel, 316L stainless
- RS-artikelnummer:
- 869-7680
- Tillv. art.nr:
- ILSE-G0100-5
- Tillverkare / varumärke:
- Sensata / Cynergy3
Denna produkt har utgått
- RS-artikelnummer:
- 869-7680
- Tillv. art.nr:
- ILSE-G0100-5
- Tillverkare / varumärke:
- Sensata / Cynergy3
Lagstiftning och ursprungsland
- COO (Country of Origin):
- GB
Produktdetaljer
Hydrostatic Level Sensor - External Mounting
Accuracy ±0.25% / Full Scale
Setting error offset <0.5% / Full scale
Reverse polarity protected
Operational life greater than 100 x106 Cycles
Setting error offset <0.5% / Full scale
Reverse polarity protected
Operational life greater than 100 x106 Cycles
Hydrostatic level transmitters provide a accurate, reliable and simple way of measuring fluid level in various situations including laboratory testing, static tank level, environmental engineering, automotive testing, container/chamber level and rainwater harvesting.
The level transmitters piezo-electronic sensor sits in an oil filled diaphragm inside a stainless steel casing. The internal signal amplifier requires no adjustment as is resistant to shock and vibration.
All hydrostatic level sensors are supplied with a traceable serial number and calibration certificate and is temperature compensated at the factory.
Sensata Cynergy3 Hydrostatic Level Transmitter, 28mA, 32V DC - ILSE Series - ILSE-G0100-5
This hydrostatic level transmitter from Sensata Cynergy3 accurately detects changes in the pressure of liquids or gases and converts them into electrical signals to control the filling of a tank. It can withstand pressures of up to 20 bar, making it suitable for use in high-pressure applications. The externally mounted transmitter features a microprocessor-based amplifier that resists foaming, vibration and shock for accurate readings in a wide range of conditions. As it's supplied pre-calibrated and temperature-compensated, the device is ready to use. You'll find level transmitters like this one used in environmental engineering and rainwater harvesting applications.
Features & Benefits
• IP65 (ingress protection) rating for protection against dust and low-pressure water jets
• Stainless steel housing is corrosion and wear-resistant for an extended service life
• Viton O-rings are chemical-resistant for use in harsh environments
• Wide media temperature range of -40ºC to +125ºC for use with both hot and cold fluids
• Stainless steel housing is corrosion and wear-resistant for an extended service life
• Viton O-rings are chemical-resistant for use in harsh environments
• Wide media temperature range of -40ºC to +125ºC for use with both hot and cold fluids
Where do I find the calibration data of this pressure transmitter?
You'll find this pressure level transmitter's calibration data on a sticker affixed to its packaging for ease of use.
Specifikationer
Attribute | Value |
|---|---|
| Device Type | Pressure |
| Mounting Type | Chassis Mount |
| Switch Output | 4-20mA |
| Body Material | 303 Stainless Steel, 316L stainless steel |
| Minimum Operating Temperature | -20°C |
| Maximum Operating Temperature | +80°C |
| Maximum DC Voltage | 32V |
| Maximum Current | 28 mA |
| Maximum Pressure | 20bar |
| Series | ILSE |
| Standards Met | CE Certified |
- RS-artikelnummer:
- 869-7680
- Tillv. art.nr:
- ILSE-G0100-5
- Tillverkare / varumärke:
- Sensata / Cynergy3