Mobrey Horizontal, Vertical Mounting Level Switch FET Output

  • RS-artikelnummer 204-6733
  • Tillv. art.nr 003H2
  • Tillverkare / varumärke Mobrey
Datablad
Lagstiftning och ursprungsland
RoHS-Försäkran
COO (Country of Origin): GB
Produktdetaljer
//media.rs-online.com/t_line/L256152-01.gif

Mobrey Ultrasonic Level Switch

The Mobrey Integral ultrasonic level sensor switch is intended for level detection at a fixed point when liquid fills the gap between the crystals. It has polyphenylene sulphide construction and two open-drain FET transistors (one conducting when the sensor is wet and the other conducting when the sensor is dry) output type. This switch It has electric voltage ranging between 18VDC/AC and 30VDC/AC.

Note:
If the liquid to be monitored is flowing, the device should be fitted with the gap inline with the flow. In storage tanks, it should be fitted with the gap vertical unless the liquid is highly aerated when it should be angled.

Features and Benefits

Vessel pressure is 5bar (maximum)
Wet switching level detection at a fixed point when liquid fills the gap between the crystals
Switched voltage is 30VDC (maximum)
Suitable for low maintenance applications
High reliability with no moving parts
Not easily subject to fouling and not affected by ambient light conditions
Fitted with 3m cable

Applications

Low level alarms in header tanks
Pump control duty in feeder tanks
High and low alarms in storage tanks
Level and pump control in storage tanks
Small or thin wall tanks
Bund level detection
Steering gear oil

Specifikationer
Attribute Value
Device Type Gap Sensor Level Alarm Switch
Mounting Type Horizontal, Vertical
Switch Output FET
Body Material Polyphenylene Sulfide
Cable Length 3m
Minimum Operating Temperature -40°C
Maximum Operating Temperature +105°C
Maximum Current 100 mA
Maximum Pressure 5bar
29 I lager för leverans inom 1 arbetsdagar
Pris (ex. moms) Each
2 467,75 kr
(exkl. moms)
3 084,69 kr
(inkl. moms)
Enheter
Per unit
1 +
2 467,75 kr