LED Reflector Bulb, Midget Groove, Red, Multichip, 5 mm Lamp, 6mm dia., 24 V ac/dc

  • RS-artikelnummer 205-959
  • Tillverkare / varumärke RS PRO
Datablad
Lagstiftning och ursprungsland
RoHS-Försäkran
COO (Country of Origin): GB
Produktdetaljer

T1 3/4 midget groove (ac/dc) multi-chip LEDs

LED lamps contain 6 LED chips, full wave bridge rectifier and a current limiting resistor
Bi-polar dc. connections

Multi-Chip LEDs

Multi-chip LEDs are semi-conducting alternatives to incandescent filament lamps. Construction consists of standard filament lamp bases incorporating a current limiting resistor and a cluster of LED chips bonded onto a substrate. Multi-chip LEDs have many advantages over standard filament lamps.

Very high immunity to shock and vibration
Current consumption is between 50 and 65% lower
Lower operating temperatures

Note

The operating voltage must not be exceeded by more than 10% as this will result in reduced life expectancy.

Specifikationer
Attribute Value
Voltage Rating 24 V ac/dc
Light Output Colour Red
Intensity 40 mcd
Lamp Base Midget Groove
Lamp Size 5 mm
Chip Type Multichip
Diameter 6mm
Length 15.25 mm
Viewing Angle 180°
Peak Wavelength 630 nm
Current Rating 14 mA
Life Hours 100000h
20 I lager för leverans inom 1 arbetsdagar
Pris (ex. moms) Each
86,34 kr
(exkl. moms)
107,92 kr
(inkl. moms)
Enheter
Per unit
1 - 24
86,34 kr
25 - 49
82,84 kr
50 - 99
80,07 kr
100 +
75,73 kr
Related Products
An RS Pro range of T5.5 LED telephone ...
Description:
An RS Pro range of T5.5 LED telephone slide filament indicators, intended for illumination in confined spaces. Suited as replacements and for applications in industries such as automotive, gaming, marine and avionics. High-quality LED light 12, 24, 28, 48 V ...
Brought to you under the trusted RS Brand, ...
Description:
Brought to you under the trusted RS Brand, these BA9s indicator lamps have a single chip LED with a built in reflector, optimising brightness and intensity while maintaining low energy consumption. The lamps are fitted with a convenient bayonet connector ...
Each switch has two sets of SPST contacts, ...
Description:
Each switch has two sets of SPST contacts, one normally open and one normally closed, permitting a wide variety of switching functions to be carried outA complete assembly requires a switch unit (or indicator), a lens and a lamp, each ...
A series of ultra-bright, sunlight-readable, water-clear LED’s suitable ...
Description:
A series of ultra-bright, sunlight-readable, water-clear LED’s suitable for a variety of applications. Specially manufactured lens provides a very wide viewing angle and high intensity output. Intensities are stated at the following viewing angles for the LED’s: Red 30°, Green ...