Pramet Indexable Lathe Tool Insert, 2.38mm x 7.8mm, Grade T8330

  • RS-artikelnummer 866-0540
  • Tillv. art.nr DCMT 070204E-FM:T8330
  • Tillverkare / varumärke Pramet
Datablad
Lagstiftning och ursprungsland
Ej tillämpbart
COO (Country of Origin): CZ
Produktdetaljer

Pramet DCMT Insert - Positive Angle

For use with SDJC, SDNCN, SDQC, SDUC, SDZC Holders & Bars.

T8330

Excellent for machining Steel, Stainless Steel and Cast Iron
Acceptable for Super Alloys
Positive Angle

T9325

Excellent for machining Steel and Stainless Steel
Acceptable for Cast Iron
Positive Angle

T9315

Excellent for machining Steel, Stainless Steel and Cast Iron
Acceptable for Super Alloys
Positive Angle

Turning Inserts

Breakdown of ISO Reference

Higher Number = Tougher / Resistant to Impact
Lower Number = Harder / Wear Resistant

TU5525 the New Universal Turning Grade

TU5525 is a truly universal tuning grade suitable for cutting Steel, Stainless Steel, Cast Iron and heat resistant Aaloys. There is no need to hold stock of a multitude of grades reducing the cost of inventory and time wasted changing inserts. One insert for almost all applications.

TP2135 a Tough Impact Resistant Grade

If insert breakage or chipping of the cutting edge is a problem TP2135 may be the answer. Some application do not offer the cutting edge a constant cutting surface whether from a non round part or holes in the part this constant impact on the cutting edge can lead to insert failing. TP2135 is designed to take higher impact loads giving a more secure cutting edge, suitable for cutting steel, stainless steel and heat resistant alloys.

Specifikationer
Attribute Value
Lathe Part Lathe Insert
Length 7.8mm
Height 2.38mm
3 I lager för leverans inom 1 arbetsdagar
Pris (ex. moms) 1 Box of 10
906,71 kr
(exkl. moms)
1 133,39 kr
(inkl. moms)
Låda(or)
Per Box
Per unit*
1 +
906,71 kr
90,671 kr
Related Products
TCMT inserts provide 3 cutting edges for improved ...
Description:
TCMT inserts provide 3 cutting edges for improved economy. Suitable for chamfering in a wide range of materials. Higher Number = Tougher / Resistant to ImpactLower Number = Harder / Wear Resistant.
For use with DCLN, PCBN, PCKN and PCLN ...
Description:
For use with DCLN, PCBN, PCKN and PCLN Holders & Bars. Excellent for machining SteelAcceptable for Cast Iron and Hardened Steels.
For use with DDJN, PDJN, PDNN, PDXN and ...
Description:
For use with DDJN, PDJN, PDNN, PDXN and PDUN Holders & Bars. Excellent for machining SteelAcceptable for Cast Iron and Hardened Steels.
TNMG Negative Turning Insert for use with DTGN, ...
Description:
TNMG Negative Turning Insert for use with DTGN, DTFN, PTFN, PTGN, PTTN, PTFN and MTJN Holders and Bars. Excellent for machining SteelAcceptable for Cast Iron and Hardened Steels.