RS PRO Lagerenhet, 2 Hål, Gjutjärn, ID 30 mm ID, L 148 mm, B 80mm, D 40.2 mm
- RS-artikelnummer:
- 750-8873
- Tillv. art.nr:
- UCFL206
- Tillverkare / varumärke:
- RS PRO
Mängdrabatt möjlig
Visa alternativ för volympriserAntal (1 enhet)*
236,17 kr
(exkl. moms)
295,21 kr
(inkl. moms)
GRATIS leverans för online beställningar över 750,00 kr
I lager
- 9 enhet(er) är redo att levereras
- Plus 44 enhet(er) är redo att levereras från en annan plats
- Dessutom levereras 50 enhet(er) från den 15 juni 2026
Behöver du mer? Ange den kvantitet du behöver och klicka på "Kontrollera leveransdatum"
Enheter | Per enhet |
|---|---|
| 1 - 4 | 236,17 kr |
| 5 - 9 | 231,44 kr |
| 10 + | 226,58 kr |
*vägledande pris
- RS-artikelnummer:
- 750-8873
- Tillv. art.nr:
- UCFL206
- Tillverkare / varumärke:
- RS PRO
Specifikationer
Datablad
Lagstiftning och ursprungsland
Produktdetaljer
Hitta liknande produkter genom att välja ett eller flera attribut.
Välj alla | Attribut | Värde |
|---|---|---|
| Varumärke | RS PRO | |
| Produkttyp | Lagerenhet | |
| Invändig diameter | 30mm | |
| Antal monteringshål | 2 | |
| Material | Gjutjärn | |
| Längd | 148mm | |
| Bredd | 80mm | |
| Djup | 40.2mm | |
| Fästehålstorlek | 16 mm | |
| Fästeshål centrum-till-centrum | 117mm | |
| Standarder/godkännanden | No | |
| Välj alla | ||
|---|---|---|
Varumärke RS PRO | ||
Produkttyp Lagerenhet | ||
Invändig diameter 30mm | ||
Antal monteringshål 2 | ||
Material Gjutjärn | ||
Längd 148mm | ||
Bredd 80mm | ||
Djup 40.2mm | ||
Fästehålstorlek 16 mm | ||
Fästeshål centrum-till-centrum 117mm | ||
Standarder/godkännanden No | ||
RoHS-status: Undantagen
- COO (ursprungsland):
- CN
RS PRO 2 Hole Flanged Bearing 30 mm ID
Providing strong perpendicular support while enabling smooth rotary motion, this cast iron flanged bearing unit is a simple and effective way to attach a rotating shaft to a surface.
The wing-shaped unit has 2 holes for mounting and is designed to allow for a moderate amount of initial misalignment. This cuts down on installation time and makes set-up straightforward and reliable. Because of its winged shape, this type of bearing can accommodate intermediate axial loads better than an unflanged bearing. The unit can also support a range of different bearing types and intermediate radial speeds.
Flanged bearings like this are widely used in industrial machinery, such as conveyor belts, and in industries such as construction, agriculture, and textile manufacture. We've given these bearing the RS PRO seal of approval, which means you can be confident of their quality and consistency.
Features and Benefits
• Made of cast iron
• Inside diameter of 30 mm
• Length of 148 mm
• Width of 80 mm
• Depth of 40.2 mm
• 2 mount holes
• 16 mm mount-hole size
• 117 mm mount hole centre-to-centre
RS PRO
RS PRO is our own brand range and brings you a wide range of high-quality, great value products offering you more choice. Trusted by engineers all over the world, every part of every RS PRO product has been rigorously tested against demanding industry standards; they’re only given the RS PRO Seal of Approval if we’re confident of their exceptional quality, which means you can be confident too.
Relaterade länkar
- SNR Lagerenhet Cylindrisk, Grått gjutjärn, ID 30 mm ID, L 148 mm, B 80mm, D 31 mm
- FAG Lagerenhet, 2 Hål, Gjutjärn, ID 30 mm ID, L 80 mm, B 148mm, D 40.2 mm
- SKF Fläns Lagerenhet, 2 Hål Cylindrisk, Gjutjärn, ID 30 mm ID, L 148 mm, B 40.7mm, D 40.2 mm
- RS PRO Fläns Lagerenhet, 2 Hål Cylindrisk, Rostfritt stål, ID 30 mm ID, L 38.1 mm, B 148mm, D 40.2 mm
- INA Lagerenhet, Gjutjärn, ID 50 mm ID, L 148 mm, B 50mm, D 50 mm
- SNR Lagerenhet Cylindrisk, Grått gjutjärn, ID 30 mm ID, L 108 mm, B 108mm, D 40.2 mm
- SNR Lagerenhet Cylindrisk, Grått gjutjärn, ID 45 mm ID, L 160 mm, B 160mm, D 40.2 mm
- FAG Lagerenhet, 4 Hål, Gjutjärn, ID 30 mm ID, L 108 mm, B 108mm, D 40.2 mm