Bartec Bartec Selector Switch Head - 2 Position, Latching

  • RS-artikelnummer 244-3465
  • Tillv. art.nr 05-0003-001201
  • Tillverkare / varumärke Bartec
Datablad
Lagstiftning och ursprungsland
Ej tillämpbart
COO (Country of Origin): DE
Produktdetaljer

Switch Actuators

Note

Selection of coloured discs are included with stock no. 244-3415; red, yellow, white, green and blue
2443421 is a pull to release latching emergency stop push button

//media.rs-online.com/t_line/L244341-01.gif

Hazardous Area Actuators & Contact Blocks

Panel mounting, with a wide range of switch contact arrangements and elements including; selector switches, key switches, standard pushbuttons and an emergency stop pushbutton. The actuators and lens units require a 30.5mm mounting hole. Ingress protection is to IP66 and they are component-approved in their own right. Switch and lamp modules include three metres of encapsulated cable. Switch modules include a wipe clean action and are rated up to 230Vac/16A (circuit type AC-12). The N/C contact has a positive break action.,The electronic circuitry of each lamp module self configures to allow the lamps to be used over a wide range of ac and dc voltages.,A simple cam arrangement on the modules provides a rapid method for the fitting of the actuators.

Specifikationer
Attribute Value
Series Bartec
Actuator Type Key
Number of Positions 2
Key Type 4A 185
Switch Actuation Latching
Key Withdrawal Position Depressed Position
Illuminated No
Number of Keys 2
Hazardous Area Certification ATEX
2 I lager för leverans inom 1 arbetsdagar
Pris (ex. moms) Each
946,11 kr
(exkl. moms)
1 182,64 kr
(inkl. moms)
Enheter
Per unit
1 - 4
946,11 kr
5 - 11
917,06 kr
12 +
887,40 kr
Related Products
Head for selector switch. Plastic bezel material 30mm ...
Description:
Head for selector switch. Plastic bezel material 30mm Mounting diameter Built-in flush Round signaling unit head Stay put Blue standard handle, Yellow standard handle 2 positions 90°.
Head for illuminated selector switch. Plastic bezel material ...
Description:
Head for illuminated selector switch. Plastic bezel material 30mm Mounting diameter Built-in flush Round signaling unit head Stay put White standard handle 2 positions 90°.
The RS PRO 2-position black selector switch head ...
Description:
The RS PRO 2-position black selector switch head has a cut-out diameter of 22.5mm. It has a robust design with a modern silver coloured bezel. The switching head has a simple installation via standard lock nut. • Actuation 2 Position ...
The RS PRO 3-position black selector switch head ...
Description:
The RS PRO 3-position black selector switch head has a cut-out diameter of 22.5mm. It has a robust design with a modern silver coloured bezel. The switching head has a simple installation via standard lock nut. • Actuation 3 Position ...