Allen Bradley Guardmaster Sensor för säkerhetskant 0110N, Skyddat område 1 m Tråd, IP67

Denna bild representerar endast produktgruppen

Se alla Kantskyddssensorer

Antal (1 enhet)*

3 891,33 kr

(exkl. moms)

4 864,16 kr

(inkl. moms)

Add to Basket
välj eller skriv kvantitet
I lager
  • Dessutom levereras 1 enhet(er) från den 18 maj 2026
  • Dessutom levereras 6 enhet(er) från den 20 maj 2026
Behöver du mer? Ange den kvantitet du behöver och klicka på "Kontrollera leveransdatum"
Enheter
Per enhet
1 +3 891,33 kr

*vägledande pris

RS-artikelnummer:
249-5983
Tillv. art.nr:
440F-E000023RS
Tillverkare / varumärke:
Allen Bradley Guardmaster
Hitta liknande produkter genom att välja ett eller flera attribut.
Välj alla

Varumärke

Allen Bradley Guardmaster

Skyddat område

1m

Produkttyp

Sensor för säkerhetskant

Längd

24.5mm

Serie

440F

Bredd

28.5mm

Husmaterial

Etylen-propylen-dienmonomer, Kloroprengummi, Nitril-Butadien-gummi

Profil

0110N

Terminaltyp

Tråd

IP-klassning

IP67

Standarder/godkännanden

CE

RoHS-status: Undantagen

COO (ursprungsland):
PL

Safedge Profiles


The Safedge pressure sensitive system is supplied in two popular profiles, with cushion factor over travel distances of 5mm and 19mm. The cushion factor is the distance the profile can be depressed after a signal has been generated.

It is mounted on an aluminium C rail (included) and is supplied in 1, 1.5 and 2m lengths that may be cut and joined in series or parallel to support a wide range of industrial applications such as power operated doors, guided vehicles and moving machinery beds.

The Safedge profile uses a combination of non-conductive rubber and flexible wire cored conductive rubber bonded together enabling it to return to its original shape even after repeated compressions.

It has no rigid internal parts to damage the rubber profile or cause fatigue failures after prolonged use. The multi-stranded copper wire core throughout the length of the strip also insures that there are no problems of resistance build up on long lengths.

A range of accessories for end termination and 90° active corner joints are also available.

2 different profile designs

Conductive rubber technology

Available in 1m, 1.5m or 2m lengths

Aluminium mounting rail

The system has a bend radius of 200mm

Rubber boot optional

Active corners

IP65 protection

Säkerhetskant


Note

These Safedge profiles are supplied part assembled. The series terminating resistor and associated end closing cap are not attached to the profile but are supplied separately in a bag. This allows the profile to be cut to the appropriate length before completing the assembly by inserting the resistor and gluing the end cap in place using industrial cyanoacrylate adhesive.

Relaterade länkar