Recom RFB DC-DC Converter, 5V dc/ 200mA Output, 4.5 → 5.5 V dc Input, 1W, Through Hole, +85°C Max Temp -40°C Min
- RS-artikelnummer:
- 185-5539
- Tillv. art.nr:
- RFB-0505S
- Tillverkare / varumärke:
- Recom
21 I lager för avsändande samma dag
Lagt till varukorgen
Pris (ex. moms) Varje
21,11 kr
(exkl. moms)
26,39 kr
(inkl. moms)
Enheter | Per unit |
1 - 4 | 21,11 kr |
5 - 9 | 20,46 kr |
10 - 24 | 19,80 kr |
25 - 49 | 19,25 kr |
50 + | 18,60 kr |
- RS-artikelnummer:
- 185-5539
- Tillv. art.nr:
- RFB-0505S
- Tillverkare / varumärke:
- Recom
Lagstiftning och ursprungsland
- COO (Country of Origin):
- TW
Produktdetaljer
RECOM DC-DC Converter, SIP-7 Package, 80% Conversion Efficiency - RFB Series - RFB-0505S
Clamp down on unstable power supplies with this DC-DC converter from RECOM. It adjusts voltages between 4.5 and 5.5V DC to a 5V DC output to make sure your equipment gets the input it needs. Thanks to an output accuracy of ±2%, you can be sure things will tick along reliably. Speedy through-hole mounting lets you slot the unit onto a board without hassle. There's no need to worry about damage caused by electrical faults, as the device's built-in short-circuit protection shuts issues down as soon as they pop up.
• Standard pin layout for easy installation
• Typical ripple voltage of 55mV to dial down disruption from electrical noise
• Switches 80% of input loads, making for energy-efficient conversion
• Measures just 19.6 (L) x 6 (W) x 10.2mm (D) to slip into busy setups
• Plastic and resin insulation cuts the risk of electric shocks
• Typical ripple voltage of 55mV to dial down disruption from electrical noise
• Switches 80% of input loads, making for energy-efficient conversion
• Measures just 19.6 (L) x 6 (W) x 10.2mm (D) to slip into busy setups
• Plastic and resin insulation cuts the risk of electric shocks
Applications
• Portable cameras
• Manufacturing industry
• Power distribution systems
• Manufacturing industry
• Power distribution systems
The RFB DC/DC converter is typically used in cost sensitive general purpose power isolation and voltage matching applications. Despite its low cost, it is a fully specified converter with 1kVDC isolation, industrial operating temperature range of -40°C to +85°C without derating and UL/EN certifications.
Can I use this converter in extreme temperatures?
Low cost 1W converter
1:1 input voltage range
SIP7 package
1kVDC isolation
Efficiency up to 80%
UL60950-1, CAN/CSA C22.2 No. 60950-1 certified
1:1 input voltage range
SIP7 package
1kVDC isolation
Efficiency up to 80%
UL60950-1, CAN/CSA C22.2 No. 60950-1 certified
Yes, this product handles operating temperatures between -40°C and +85°C, so it's a safe bet for tough industrial conditions.
Specifikationer
Attribute | Value |
---|---|
Output Voltage | 5V dc |
Input Voltage Range | 4.5 → 5.5 V dc |
Power Rating | 1W |
Input Voltage Nominal | 5 V dc |
Output Current | 200mA |
Mounting Type | Through Hole |
Isolated | Yes |
Number of Outputs | 1 |
Package | SIP |
Isolation Voltage | 1kV dc |
Depth | 10.2mm |
Length | 19.6mm |
Width | 6mm |
Series | RFB |
Load Regulation | ±15% |
Maximum Temperature | +85°C |
Efficiency | 80% |
Minimum Temperature | -40°C |
Standards Met | CAN/CSA-C22.2 No 60950-1, cURus, E358085, EN55032, UL60950-1 |