Artesyn Embedded Technologies AIH DC-DC Converter, 24V dc/ 10.4A Output, 250 → 420 V dc Input, 250W, Through
- RS-artikelnummer:
- 461-840
- Tillv. art.nr:
- AIH10H300-L
- Tillverkare / varumärke:
- Artesyn Embedded Technologies
Tillfälligt slut i lager – restorder för leverans 2025-05-09
Lagt till varukorgen
Pris (ex. moms) Varje
3 672,32 kr
(exkl. moms)
4 590,40 kr
(inkl. moms)
Enheter | Per unit |
1 - 4 | 3 672,32 kr |
5 - 9 | 3 525,42 kr |
10 - 24 | 3 415,25 kr |
25 - 49 | 3 231,68 kr |
50 + | 3 011,34 kr |
- RS-artikelnummer:
- 461-840
- Tillv. art.nr:
- AIH10H300-L
- Tillverkare / varumärke:
- Artesyn Embedded Technologies
Datablad
Lagstiftning och ursprungsland
- COO (Country of Origin):
- PH
Produktdetaljer
Astec 250W Half Brick, High Power, Regulated, Isolated DC-DC Converter - AIH Series
Isolated single output half brick DC-DC converter module with 250W output and a maximum baseplate operating temperature of 100°C without derating. This single output half brick DC-DC converter module has full safety isolated secondary side control and I2C bus for communication.
Half-Brick, low profile package dc-dc converters, designed for use with Astec AIT & AIF PFC series power supplies
High voltage 250-420Vdc input voltage range
Regulated outputs
Adjustable output voltage by using external resistors (74 to 120% for 5V, 80 to 120% for 12V & 24V)
2.7kV input / output isolation
High efficiency up to 87%
No minimum load required
EMC meets EN 55022 Class A with a recommended filter (refer to Astec Technical Reference Note)
Low output ripple and noise
Control and monitoring functions ( Remote Enable and Current & Temperature Monitoring)
Parallelable with accurate current sharing
Remote sense
Over-voltage, over-current, over-temperature and short circuit protection
High voltage 250-420Vdc input voltage range
Regulated outputs
Adjustable output voltage by using external resistors (74 to 120% for 5V, 80 to 120% for 12V & 24V)
2.7kV input / output isolation
High efficiency up to 87%
No minimum load required
EMC meets EN 55022 Class A with a recommended filter (refer to Astec Technical Reference Note)
Low output ripple and noise
Control and monitoring functions ( Remote Enable and Current & Temperature Monitoring)
Parallelable with accurate current sharing
Remote sense
Over-voltage, over-current, over-temperature and short circuit protection
Note
MTBF to Telcordia Tech SR-332.
Standards
EN 60950, UL 60950, IEC 60950
Approvals
UL/cUL recognised, TUV
Astec - High Power - 300Vin DC/DC Converters
Specifikationer
Attribute | Value |
---|---|
Output Voltage | 24V dc |
Input Voltage Range | 250 → 420 V dc |
Power Rating | 250W |
Input Voltage Nominal | 300 V dc |
Output Current | 10.4A |
Mounting Type | Through Hole |
Isolated | Yes |
Number of Outputs | 1 |
Package | 1/2 Brick |
Length | 61mm |
Depth | 12.7mm |
Series | AIH |
Efficiency | 88% |
Minimum Temperature | -20°C |
Maximum Temperature | +100°C |
- RS-artikelnummer:
- 461-840
- Tillv. art.nr:
- AIH10H300-L
- Tillverkare / varumärke:
- Artesyn Embedded Technologies