Megger MIT230, Insulation Tester 999MΩ CAT III 300 V

  • RS-artikelnummer 535-3191
  • Tillv. art.nr MIT230-EN
  • Warranty 3 År
  • Tillverkare / varumärke Megger
Datablad
Lagstiftning och ursprungsland
Ej tillämpbart
COO (Country of Origin): GB
Produktdetaljer

MIT230 Insulation & Continuity Tester

The MIT230 incorporates a range of safety and operation features in one of the smallest electrical insulation testers available. Its LCD offers a combination of digital readout and analogue display, with an analogue pointer response for evaluating circuit charge and discharge characteristics. The instrument housing is in tough ABS.

Features & Benefits

Insulation testing to 1000 MΩ
Dual & triple test voltages models
Digital display with electronic analogue arc display helps to confirm insulation condition & to monitor fluctuating readings not apparent on the digital display
Continuity testing at 200 mA down to 0.01 Ω resolution
Automatic discharge of circuit under test
1 mA test current at selected voltage range
Default voltmeter automatically switches in when the instrument is connected to a circuit with an AC or DC voltage greater than 25 V
Auto-ranging analogue arc scale shows only the scale in use
Live circuit warning above 25 V, also inhibits insulation & continuity tests above 50 V
Lead resistance compensation on continuity
Hands free continuity testing Auto power-down after 5 min
Complies with IEC 1010-1 safety standard installation Category III, 600 V phase to earth
Conforms to EN61557-1
Tests to BS7671, 713-02, 713-03, 713-04, 713-06, 713-08, 413-04-04

Note

RS is an authorised Megger distributor. Purchased though RS this product is eligible for the Megger extended 3 Year warranty

Supplied with

6 x AA alkaline batteries, test leads, crocodile clips, carry case, instructions

Warning

  • When measuring voltages, the use of fused test leads is recommended for personal safety.
Specifikationer
Attribute Value
Tester Type Insulation & Continuity Tester
Minimum Test Voltage 250V
Maximum Test Voltage 1000V dc
Maximum Insulation Resistance Measurement 999MΩ
Display Type LCD
Test Current 200mA
Battery Life 3000 5-Second Tests
Minimum Operating Temperature -10°C
Maximum Operating Temperature +55°C
Power Source Battery
Safety Category Level CAT III
Safety Category Voltage 300V
Safety Category CAT III 300 V
Dimensions 195 x 98 x 40mm
Width 98mm
Weight 530g
Battery Type AA
Height 40mm
Model Number p MIT230
Length 195mm
41 I lager för leverans inom 1 arbetsdagar
Pris (ex. moms) Each
5 645,64 kr
(exkl. moms)
7 057,05 kr
(inkl. moms)
Enheter
Per unit
1 +
5 645,64 kr
Kalibrerade alternativ:
Related Products
In its rugged worksite enclosure, the CA 6545 ...
Description:
In its rugged worksite enclosure, the CA 6545 Megohmmeter is ideal for quantitative and qualitative insulation analysis. Also automatically measures voltage, capacitance and residual currents.Giant backlit LCD screen with digital display + bar graph.IP53 housingQualitative analysis: automatic calculation of DAR, ...
A portable digital flash tester incorporating an electronically ...
Description:
A portable digital flash tester incorporating an electronically controlled variable test voltage and safety flash probe, suitable for testing to 17th Edition Regulations (BS7671). Selectable 120/240V, 50/60Hz operationIncorporates a solid state regulator to give stepless voltage adjustment, with safety zero ...
The 103 offers simple straightforward operation in a ...
Description:
The 103 offers simple straightforward operation in a factory test or lab/compliance environment. Providing simple manual testing or complete automated operation, equipment can be tested quickly and safely. Earth Bond TestPerforms a.c./d.c. Flash and d.c. IR testsFully isolated HT outputs ...
The HAL 101 offers simple straightforward operation in ...
Description:
The HAL 101 offers simple straightforward operation in a factory test or lab/compliance environment. Providing simple manual testing or complete automated operation, equipment can be tested quickly and safely. Fast automatic production testing using sequence capabilityPerforms a.c./d.c. Flash and d.c. ...