Megger MIT220, Insulation & Continuity Tester, 500V dc, 999MΩ, CAT III 300V

  • RS-artikelnummer 535-3185
  • Tillv. art.nr MIT220-EN
  • Tillverkare / varumärke Megger
Datablad
Lagstiftning och ursprungsland
Ej tillämpbart
COO (Country of Origin): GB
Produktdetaljer

MIT220 Insulation & Continuity Tester

The MIT200 is one of the smallest insulation testers available on the market today. With options of a two voltage tester to a three voltage instrument, the MIT200 instruments offer a range of safety and operation features.

Insulation testing to 1000MΩ
Dual & triple test voltages models
Digital display with electronic analogue arc display helps to confirm insulation condition & to monitor fluctuating readings not apparent on the digital display
Continuity testing at 200mA down to 0.01ohms resolution
Automatic discharge of circuit under test
1mA test current at selected voltage range
Default voltmeter automatically switches in when the instrument is connected to a circuit with an AC or DC voltage greater than 25V
Autoranging analogue arc scale shows only the scale in use
Live circuit warning above 25V, also inhibits insulation & continuity tests above 50V
Lead resistance compensation on continuity
Hands free continuity testing Auto power-down after 5 minutes
Complies with IEC 1010-1 safety standard installation Category III, 600V phase to earth
Conforms to EN61557-1
Tests to BS7671, 713-02, 713-03, 713-04, 713-06, 713-08, 413-04-04

Note

RS is an authorised Megger distributor. Purchased though RS this product is eligible for the Megger extended 3 Year warranty

Supplied with

6 x AA alkaline batteries, test leads crocodile clips, carry case & instructions.

Megger Insulation and Continuity Tester

The Megger 1000Mohm insulation and continuity tester incorporates a range of safety and operation features in one of the smallest electrical insulation testers available. Its LCD offers a combination of digital readout and analogue display, with an analogue pointer response for evaluating circuit charge and discharge characteristics. The instrument housing is in tough ABS.
Supplied with
6 x AA alkaline batteries, test leads crocodile clips, carry case and instructions.

Features and Benefits

250V to 500V test voltage
Dual and triple test voltages models
Digital display with electronic analogue arc display helps to confirm insulation condition and to monitor fluctuating readings not apparent on the digital display
Continuity testing at 200mA down to 0.01ohm resolution
Automatic discharge of circuit under test
1mA test current at selected voltage range
Default voltmeter automatically switches on when the instrument is connected to a circuit with an AC or DC voltage greater than 25V
Auto ranging analogue arc scale shows only the scale in use
Live circuit warning above 25V, also inhibits insulation and continuity tests above 50V
Lead resistance compensation on continuity
Hands free continuity testing auto power down after 5 minutes
Operating temperature ranges between -10°C and 55°C

Applications

Domestic sites
Commercial sites
Industrial sites

Certifications

BS7671
BS76713-02
BS76713-03
BS76713-04
BS76713-06
BS76713-08
BS76413-04-04
EN61557-1
IEC 1010-1
IP40 rated

Warning

  • When measuring voltages, the use of fused test leads is recommended for personal safety.
Specifikationer
Attribute Value
Tester Type Insulation & Continuity Tester
Minimum Test Voltage 250V
Maximum Test Voltage 500V dc
Maximum Insulation Resistance Measurement 999MΩ
Display Type LCD
Test Current 200mA
Battery Life 3000 5-Second Tests
Minimum Operating Temperature -10°C
Maximum Operating Temperature +55°C
Power Source Battery
Safety Category Level CAT III
Safety Category Voltage 300V
Safety Category CAT III 300V
Battery Type AA
Length 195mm
Width 98mm
Dimensions 195 x 98 x 40mm
Model Number p MIT220
Weight 530g
Height 40mm
13 I lager för leverans inom 1 arbetsdagar
Pris (ex. moms) Each
4 503,07 kr
(exkl. moms)
5 628,84 kr
(inkl. moms)
Enheter
Per unit
1 +
4 503,07 kr
Kalibrerade alternativ:
Related Products
4 pole earth tester for measuring soil resistivity ...
Description:
4 pole earth tester for measuring soil resistivity and resistance of earth rods and associated installations. Supplied in a hard carry case together with auxiliary stakes and cables.,An ICLAMP selective clamp is available separately, and when used with the DET4TC ...
DET24C is a clamp-on ground resistance tester that ...
Description:
DET24C is a clamp-on ground resistance tester that set new standards in terms of access, performance, features, simplicity of operation and safety. The units are designed with flat core ends to prevent dirt build-up, ensuring measurement integrity and improved reliability ...
A portable digital flash tester incorporating an electronically ...
Description:
A portable digital flash tester incorporating an electronically controlled variable test voltage and safety flash probe, suitable for testing to 17th Edition Regulations (BS7671). Selectable 120/240V, 50/60Hz operationIncorporates a solid state regulator to give stepless voltage adjustment, with safety zero ...
The Fluke Insulation Multimeters combine a digital insulation ...
Description:
The Fluke Insulation Multimeters combine a digital insulation tester with a full-featured, true RMS digital multimeter in a single, compact, handheld unit, which provides maximum versatility for both troubleshooting and preventative maintenance. Large display with backlightInsulation test: 1587: 0.01 MΩ ...