Megger MIT320, Insulation Tester 999MΩ CAT III 600 V UKAS Calibration

  • RS-artikelnummer 516-9198
  • Tillv. art.nr MIT320
  • Tillverkare / varumärke Megger
Datablad
Lagstiftning och ursprungsland
Ej tillämpbart
COO (Country of Origin): GB
Produktdetaljer

MIT 300 Series Insulation & Continuity Testers

A range of insulation testers that meet the relevant requirements of EN61557, BS7671, HD 384, IEC 364 and VDE 0413 for applications in all aspects of electrical contracting, building maintenance, testing, inspection and servicing.

20mm LCD display with true analogue response
Tough rubber armoured case with self contained display cover that locks away underneath the instrument during use
Designed to hang comfortably around the neck for hands-free, or for bench use
Automatic 200mA fast continuity test on connection to the circuit
Lead resistance nulling on continuity allows for use of fused test probes
Automatic discharge of circuit under test
Safety input terminal interlock - prevents unsafe connection of test leads
Intelligent Safety System - even if connected to a live circuit whilst on continuity setting the tester will remain safe and undamaged
Live voltage warning alerts the operator when a circuit voltage over 25V exists when insulation testing
Safety lockout prevents the test from operating when the circuit voltage is > 50V
Continuity check - prevents a continuity test or buzzer test on a live circuit
3 phase safe - will not be damaged if connected across phases
Locking test button
Meets the requirement of BS EN 61010-1 for safe connection to a 440V Installation Category III supply (600V Phase to Earth)
IP54

MIT310A

Moving coil display

MIT320 benefits from the following additional features:

Backlit display and range selection ideal for low light environment
Selectable insulation alarm limit for fast go - no go testing
Selectable continuity alarm limit for fast go - no go testing
Resistance measurement range to 1 MΩ
SP3 switched probe supplied for one handed operation
SP1000 illuminated switched probe with ultra-bright LED light available separately

Note

RS is an authorised Megger distributor. Purchased though RS this product is eligible for the Megger extended 3 Year warranty

Supplied with

instructions, 2 wire test lead set with crocodile clips, 8 x AA alkaline batteries, neck strap & carry case.

Specifikationer
Attribute Value
Tester Type Insulation & Continuity Tester
Minimum Test Voltage 250V
Maximum Test Voltage 1000V dc
Maximum Insulation Resistance Measurement 999mΩ
Display Type LCD
Calibrated UKAS
Test Current 1mA
Battery Life 5000 5-Second Tests
Minimum Operating Temperature -10°C
Maximum Operating Temperature +60°C
Power Source Battery
Safety Category Level CAT III
Safety Category Voltage 600V
Safety Category CAT III 600 V
Battery Type AA
Plug Type Type G - British 3-pin
Height 78mm
Model Number p MIT320
Length 203mm
Dimensions 203 x 148 x 78mm
Width 148mm
Weight 980g
18 I lager för leverans inom 3-5 arbetsdagar
Pris (ex. moms) Each
7 798,05 kr
(exkl. moms)
9 747,56 kr
(inkl. moms)
Enheter
Per unit
1 +
7 798,05 kr
Nästa dag-leverans inte möjlig
Relaterte Produkter
MIT480 mk2 Series insulation & continuity testers replace ...
Description:
MIT480 mk2 Series insulation & continuity testers replace the original MIT480 range. Designed for the Telecommunication and Cable testing markets. The tester features a redesigned case, back-stand and 6 cell battery compartment with separate fuse access. Insulation testing up to ...
Insulation resistance testers are used to ensure the ...
Description:
Insulation resistance testers are used to ensure the insulation of wiring is safe, or undamaged after electrical work has been carried out. Testers or megohmmeters are vital in preventing tripped fuses, electrical equipment and instrument breakdown, risk of electric shock ...
Digital/analogue display with backlightingSelect the testing voltage for ...
Description:
Digital/analogue display with backlightingSelect the testing voltage for a variety of applicationsAutomatic dischargeSensor head with extra activation buttonDetects live switchesAdjustable threshold alarm (good/poor testing)Auto power off functionSafety: CAT III 600VProtection rating: IP54.
High voltage insulation tester ideal for testing high ...
Description:
High voltage insulation tester ideal for testing high voltage equipment including switchgear, motors, generators and cables. Meets requirements of IEEE 43-2000 Capacitance and leakage current measurement Resistance measurements up to 2TΩ (Fluke 1555)Ramp function for breakdown testingVoltage breakdown detection ...