Surge Arrester, 10kA, 275 V, DIN Rail Mount

Datablad
Lagstiftning och ursprungsland
RoHS-Försäkran
COO (Country of Origin): BE
Produktdetaljer

Acti9 iPRD Quick Surge Arresters

Acti 9 iPRD DIN rail Surge Protector Devices are geared to absolute safety and improved continuity of service

Maximum discharge current 8 to 65 kA
Integrated disconnector for short-circuit current withstand, Isc, up to 25 kA
Maximum steady state voltage, Uc = 260, 440 V
Fixed or withdrawable surge arresters

Surge Protection Devices, SPDs (DIN-rail)

Voltage surges, often referred to as spikes or transients are typically caused by switching of fluorescent lights, fuses blowing or nearby lightning activity. The worst voltage surges are usually caused by lightning and can reach up to 6000V, with current surges of over 3000A. The maximum size of the voltage and current surges depends on the location within the building's wiring system. BS7671: 2011 Amendment 1 Sections 443 and 534 cover risk assessment and provides guidance on protection of electronic equipment for installation engineers to follow. The fullest information on lightning and surge protection comes from the BSEN 62305 series of standards.

Specifikationer
Attribute Value
Maximum Surge Current 10kA
Range Acti 9
Voltage Protection Rating 275 V
Series iPRD
Mounting Style DIN Rail
Length 109.7mm
Width 36mm
Depth 72.1mm
Minimum Operating Temperature -5°C
Maximum Operating Temperature +60°C
Operating Temperature Range -5 → +60 °C
Dimensions 109.7 x 36 x 72.1 mm
I lager för leverans inom 2 arbetsdagar
Pris (ex. moms) Each
3 071,90 kr
(exkl. moms)
3 839,88 kr
(inkl. moms)
Enheter
Per unit
1 +
3 071,90 kr
Nästa dag-leverans inte möjlig
Related Products
The Phoenix Contact Plug-in surge arrester used for ...
Description:
The Phoenix Contact Plug-in surge arrester used for 3-phase power supply networks with combined PE and N installed in one conductor (3-conductor system: L1, L2, PEN). Remote indication contact-40°C to 80°C ambient temperature V-0 flammability rating according to UL 96. ...
The Phoenix Contact Pluggable surge protective device free ...
Description:
The Phoenix Contact Pluggable surge protective device free of leakage current used for 1-phase power supply networks with separate N and PE (3-conductor system: L1, N, PE). Remote indication contact-40°C to 80°C ambient temperature V-0 flammability rating according to UL ...
The Phoenix industrial surge protector has integrated status ...
Description:
The Phoenix industrial surge protector has integrated status protector with two signal wires . It suitable for maximum protection of sensitive equipment normally in harsh environments. It used polyamide material and its colour is grey. Degree of protection is IP20Ambient ...
The Phoenix Contact Plug-in lightning current arrester used ...
Description:
The Phoenix Contact Plug-in lightning current arrester used in power supply networks between N and PE mode of protection. V-0 flammability rating according to UL 96-40°C to 80°C ambient temperature Surge protection fault message.