- RS-artikelnummer:
- 648-5261
- Tillv. art.nr:
- 1681868
- Tillverkare / varumärke:
- Phoenix Contact
2 I lager för avsändande samma dag
19 Inom 1 arbetsdag(ar) (UK lager)
Lagt till varukorgen
Pris (ex. moms) Varje
225,02 kr
(exkl. moms)
281,28 kr
(inkl. moms)
Enheter | Per unit |
1 - 4 | 225,02 kr |
5 - 24 | 218,27 kr |
25 + | 209,04 kr |
- RS-artikelnummer:
- 648-5261
- Tillv. art.nr:
- 1681868
- Tillverkare / varumärke:
- Phoenix Contact
Lagstiftning och ursprungsland
- COO (Country of Origin):
- DE
Produktdetaljer
M8 Sensor / Actuator Cable, with Open Cable End
For mounting with a connector from the SACC range
Phoenix Contact Actuator Cable, 24AWG Wire Size, 5m Length - SAC-4P- 5.0-PUR/M 8FS - 1681868
For clear and steady data signals between sensors and machinery, opt for this Phoenix Contact sensor actuator cable. Its 4-core configuration means you can transmit data to 4 circuits simultaneously, minimising your wiring and saving space in your equipment. On one end there's an M8 connector with tinned-copper conductors that are highly conductive and provide a reliable connection. The other end is free, so you can terminate it to suit your system. An outer sheath made from PUR is resistant to impact and abrasion, allowing the cable to perform long-term in challenging conditions.
A low current rating of 4A indicates this device is energy-efficient and emits little heat, while an extended length of 5m lets you make longer wiring runs. An IP67 rating indicates the cable is dust-tight and can withstand immersion in up to 1m of water for 30 minutes, so it's suitable for use in contaminated and damp environments.
A low current rating of 4A indicates this device is energy-efficient and emits little heat, while an extended length of 5m lets you make longer wiring runs. An IP67 rating indicates the cable is dust-tight and can withstand immersion in up to 1m of water for 30 minutes, so it's suitable for use in contaminated and damp environments.
• Nitrile rubber seals to protect against external contaminants and support optimal performance
• Light weight of 130g for easy handling and minimal strain on equipment
• Voltage rating of 30V to suit low-voltage applications
• Light weight of 130g for easy handling and minimal strain on equipment
• Voltage rating of 30V to suit low-voltage applications
Specifikationer
Attribute | Value |
---|---|
Series | SAC-4P- 5.0-PUR/M 8FS |
Cross Sectional Area | 0.25 mm² |
Length | 5m |
Sheath Colour | Black |
Sheath Material | PUR |
Connector 1 Number of Contacts | 4 |
Connector 1 Gender | Female |
Connector 1 Orientation | Straight |
Connector 1 | M8 |
Connector 2 | Unterminated |
Coding | A |
Shielded/Unshielded | Unshielded |
Current Rating | 4 A |
Voltage Rating | 30 V |
IP Rating | IP65, IP67, IP68 |
Insulation Material | PP |
American Wire Gauge | 24 AWG |
Operating Temperature Range | -25 → +90 °C |
Conductor Material | Bare Cu litz wires |
Minimum Operating Temperature | -25°C |
Conductor Resistance | 78 Ω/km |
Connector 1 Housing Gender | Female |
Maximum Operating Temperature | +90°C |
Standards Met | cUL, cULus, EAC, UL |