GF708AMA-AE Sensitec, Inclinometer Sensor

  • RS-artikelnummer 123-6294
  • Tillv. art.nr GF708AMA-AE
  • Tillverkare / varumärke Sensitec
Datablad
Lagstiftning och ursprungsland
RoHS-Försäkran
COO (Country of Origin): DE
Produktdetaljer

GF708 MagnetoResistiver Magnetic Field Sensors

The GF708 magnetic field sensors from Sensitec are based on the GMR (Giant MagnetoResistive) effect. They feature a Wheatstone bridge with on-chip flux concentrators, providing an improvement in sensitivity.
The GF708 sensor can be used for highly sensitive applications with a sensitivity of 130 mV/V/mT. Alternatively it can be used as an indexing sensor.

Features and Benefits
Large air gap
Large permissible air gap tolerances
High switching accuracy
Easy identification of field direction
Simple integration
Allows use of small magnets
Allows detection of smaller particles or material defects (NDT)
Large permissible distance to target
High resolution for magnetic imaging


Product Applications
Suitable applications for the GF708 sensors include switching applications and magnetic field measurement.

Magnetoresistive Sensors, Sensitec

Tillfälligt slut i lager – restorder för leverans 2020-07-10
Pris (ex. moms) Each (On a Reel of 2500)
31,519 kr
(exkl. moms)
39,399 kr
(inkl. moms)
Enheter
Per unit
Per Reel*
2500 +
31,519 kr
78 797,50 kr
Related Products
3D magnetic flux density sensingVery low-power consumption = ...
Description:
3D magnetic flux density sensingVery low-power consumption = 10 μA during operation (10 Hz, typ)Power-down mode with 7 nA power consumptionDigitial output via 2-wire standard I2C interface up to 1 MBit/sec12-bit data resolution for each measurement directionBx, By and Bz ...
A range of MagnetoResistive FixPitch position sensors from ...
Description:
A range of MagnetoResistive FixPitch position sensors from Sensitec, available in a range of different pitches. Each position sensor incorporates two Wheatstone bridges on chip.The sensor outputs are proportional to sine and cosine of the coordinates measured. Each sensor is ...
The AA745 position sensors from Sensitec are designed ...
Description:
The AA745 position sensors from Sensitec are designed to detect angle and length. Based on the AMR effect (anisotropic magnetoresistive), the AA745 sensors contain two independent Wheatstone bridges with common ground and supply pin. AA745 sensors also feature PerfectWave technology ...
Description:
The TLE5012B is a 360° angle sensor that detects the orientation of a magnetic field. This is achieved by measuring sine and cosine angle components with monolithic integrated Giant Magneto Resistance (iGMR) elements. Highly precise angle values are determined over ...