3M 10-Way IDC Connector Socket for Cable Mount, 2-Row

  • RS-artikelnummer 827-1897
  • Tillv. art.nr 3473-6010
  • Tillverkare / varumärke 3M
Datablad
Lagstiftning och ursprungsland
Ej tillämpbart
Produktdetaljer

3M 3000 Series 2.54 x 2.54 mm Cable Mount IDC Socket Connectors

3000 series cable mount industry standard IDC ribbon cable socket connectors with a 2.54 x 2.54 mm pitch. These IDC cable sockets accept 26 AWG and 28 AWG solid and stranded 1.27 mm pitch flat ribbon cable or discrete wire. The use of IDC contacts eliminates the need for prior cable preparation and stripping and provides a quick and simple interconnection system for mass termination. The contacts are made from beryllium copper which has a high resistance to corrosion, good wear resistance and better electrical conductivity than brass or bronze. The housings of these 3000 series IDC sockets feature dual slot military polarization to aid accurate mating with the header connector. The design of these 3000 series IDC sockets sets the standard for MIL spec and IEC standardization. These 3000 series ribbon cable sockets feature positive locking metal 'J' clips that ensure the cover of the connector is securely retained. The covers have a transfer adhesive on them that holds the cover onto the ribbon cable for precise alignment between the connector and the cables. This feature also results helps with the production of high yield terminations. A pull tab is available separately which is attached to the socket using a strip of adhesive. The pull tab is used to reduce stress on the cable terminations when the socket connector is unplugged from the mated header. A keying plug is also available which is plugged into a socket contact so that the male pin cannot enter it.

Features & Benefits

IDC contacts for quick and easy mass termination
No cable preparation required
Robust and reliable beryllium copper contacts
Positive locking metal ’J’ clips for secure cover retention
Transfer adhesive on covers for precise cable to connector alignment

Product Application Information

These 3000 series wire mount IDC sockets are used in wire to board or internal wiring applications. Applications include factory and automation, test and instrumentation, medical, communications and networking and computers and peripherals

Military dual slot polarization
Open ended cover for daisy chaining or bussing
Plastic strain relief to prevent damage to cable and contacts when unplugging

Specifikationer
Attribute Value
Number of Contacts 10
Number of Rows 2
Gender Female
Pitch 2.54mm
Mounting Type Cable Mount
Body Orientation Straight
Termination Method IDC
Current Rating 1A
Contact Plating Gold over Nickel
Series 3000
Minimum Operating Temperature -55°C
Maximum Operating Temperature +105°C
Voltage Rating 1 kV ac
Housing Material Glass-Filled PET
Contact Material Phosphor Bronze
271 I lager för leverans inom 1 arbetsdagar
Pris (ex. moms) Each
25,75 kr
(exkl. moms)
32,19 kr
(inkl. moms)
Enheter
Per unit
1 - 9
25,75 kr
10 - 24
23,27 kr
25 - 49
21,09 kr
50 - 99
19,96 kr
100 +
18,30 kr
Related Products
These 3M 102 Series Mini D Ribbon (MDR) ...
Description:
These 3M 102 Series Mini D Ribbon (MDR) Boardmount Shielded Receptacles have a 0.050 inch (1.27 mm) pitch. The design of these 102 Series Mini D Ribbon (MDR) Boardmount Shielded Receptacles includes an interface latch for improved stability. The material ...
The solder profile must comply with the WE ...
Description:
The solder profile must comply with the WE technical soldering specification, otherwise this will void the warranty Other soldering methods are not verified and have to be validated by the customer at his own risk Cleaning and Washing:Parts are not ...
Tin plated board to board/board to wire interconnection ...
Description:
Tin plated board to board/board to wire interconnection system. Single row IDC connectors with right angle exit for flat or single wire cablesNo special prepration of cables requiredCan be assembled by handDouble blade contactsRated at 3A/1000VFlammabilty rating UL94 V-0.
From Stelvio Kontek, this range of AUTOCOM Single ...
Description:
From Stelvio Kontek, this range of AUTOCOM Single Row IDC Connectors with 90° exit are designed to receive flat or single wire cables in size ranges are 22-24 AWG and 26-28 AWG. Suitable for a variety of low voltage applications, ...