Watson Smith 1.75L/min NPT 1/4 Female EP Converter, NPT, 1/4 in, 2 → 120psi

  • RS-artikelnummer 729-486
  • Tillv. art.nr 540400R
  • Tillverkare / varumärke Watson Smith
Datablad
Lagstiftning och ursprungsland
Ej tillämpbart
COO (Country of Origin): GB
Produktdetaljer

Standard Converters

These standard converters are reliable pneumatic fittings. This range has a 1/4 inch female port and includes mounting bracket and connector plug. There is minimal vibration from this converter and it also has the benefit of being sensitive to low pressures. Proportional converters have a glass reinforced nylon cover and nitrile diaphragms. This range of pneumatic pressure control proportional converters provide excellent pressure control providing oil free, dry air filtered to 5μm.

Integral volume booster gives flow rates up to 4·72 dm3/s, 10scfm
Response time typically 2 seconds (10-90%)
Low supply pressure sensitivity
1/4 inch female port connection
Supplied with DIN43650 connector plug

Note

*Inlet pressure must be at least 0.7 bar above output pressure

//media.rs-online.com/t_line/L729470-02.gif
//media.rs-online.com/t_line/LD729470-02.gif
//media.rs-online.com/t_line/LE729470-02.gif
//media.rs-online.com/t_line/LF729470-99.gif
//media.rs-online.com/t_line/LI729470-02.gif

I/P & E/P Converters

I/P converters are electro-pneumatic instruments that will change pneumatic pressures in response to varying electrical current and voltage input signals. They have extensive application potential in both industrial and process systems, for control of cylinders, valves, valve positioners, relays, brakes and clutches. The converters can be mounted in control rooms or in the field, and have zero and span settings that are adjustable from the front face of the instrument. Failsafe converters are available which will cause the output pressure to fall to <15mbar (0.2 psig) in the event of power failure or loss of input signal.

Specifikationer
Attribute Value
Manufacturer Series 100X, 101X
Flow Rate 1.75L/min
Input Signal 1 → 10V (Volts)
Connection Size NPT 1/4 Female
Connection Thread Standard NPT
Maximum Operating Pressure 120 psi
Maximum Operating Temperature +60°C
Connection Thread Size 1/4 in
Minimum Operating Pressure 2psi
2 I lager för leverans inom 1 arbetsdagar
Pris (ex. moms) Each
4 167,20 kr
(exkl. moms)
5 209,00 kr
(inkl. moms)
Enheter
Per unit
1 +
4 167,20 kr
Related Products
A range of high-efficiency DC-DC Converters from Linear ...
Description:
A range of high-efficiency DC-DC Converters from Linear Technology which are able to operate as Step-up (Boost), Step-down (Buck) or Inverting regulators. These highly integrated devices require only a few external components for full regulator functionality and many incorporate features ...
The NCP1611 Evaluation Board implements a complete 160W/390 ...
Description:
The NCP1611 Evaluation Board implements a complete 160W/390 Vdc nominal Power Factor Correction Stage and operates from 90-265 Vac. The board illustrates a low profile ( 95% with a PF > 0.95 and meets EN61000-3-2 Class C and Class D ...
EFD type ferrite core low profile SMT package ...
Description:
EFD type ferrite core low profile SMT package with 10 gull wing terminals. High through-put power capabilityApplications in general purpose isolated DC/DC Converters (up to 55W); Power over Ethernet (PoE/12W and PoE +/30W) Powered Devices (PD) and Power Sourcing Equipment ...
Transformer for high efficiency power suppliesThree transformer sizes ...
Description:
Transformer for high efficiency power suppliesThree transformer sizes with three values per size availableLitz wire for low eddy current losses Defined leakage inductance for use without additional resonant inductorTesting voltage 4 kV (AC)Applications include: Power supplies, including PC and Notebook ...