Parker Steel Zinc Plated Hydraulic Elbow Threaded Adapter, 6E6MK4S, G 3/8 Female G 3/8 Female

  • RS-artikelnummer 797-2040
  • Tillv. art.nr 6E6MK4S
  • Tillverkare / varumärke Parker
Datablad
Lagstiftning och ursprungsland
Ej tillämpbart
Produktdetaljer

Swivel Elbow

Female to female parallel thread swivelling elbow.
Parkers K series adapters are manufactured to meet BS5200 standards and designed to seal with BSP
Hose swivel connectors. Parkers K4 adapter series can be used with Parker D9/92, B1, B2 and B4 adapters. Straight fittings can also be used an adaptor with ISO 1179-1 / DIN 3852 ports by using a bonded seal.

Note

K4 adapters are not interchangeable with JIS P4 fittings.

Elbow & Tee Adaptors

BSP parallel threaded adaptors. Manufactured from steel to BS5200 with a zinc yellow chromated finish to give a high corrosion resistance (500 hours in salt spray test). All adaptors have a working temperature range -40 to +120°C.,The 60° female cone makes these adaptors an ideal port fitting for use with our range of BSP reusable fittings and crimped hose assemblies.

Warning

  • Hydraulic systems can work at high pressures, and fittings and adaptors can be subjected to extreme loadings such as vibration and uncontrolled pressure peaks. When choosing fittings or adaptors careful attention should be given to the technical specifications.
Specifikationer
Attribute Value
Connector A G 3/8 Female
Connector B G 3/8 Female
Material Steel
Finish Zinc Plated
Connector A - Gender Female
Connector A - Thread Standard G
Connector B - Gender Female
Connector B - Thread Standard G
Maximum Operating Pressure 350 bar
23 I lager för leverans inom 1 arbetsdagar
Pris (ex. moms) Each
96,06 kr
(exkl. moms)
120,08 kr
(inkl. moms)
Enheter
Per unit
1 - 4
96,06 kr
5 - 9
92,14 kr
10 - 24
90,11 kr
25 +
88,16 kr
Related Products
Nickel-plated brass body material. Enhances the aesthetic appearance ...
Description:
Nickel-plated brass body material. Enhances the aesthetic appearance of installations and complements existing push-in fitting ranges. The items are corrosion resistant.
A selection of tee adaptors with a robust ...
Description:
A selection of tee adaptors with a robust design suitable for both low and high pressure depending on the material required. The elbows have increased corrosion resistance and excellent mechanical strength. Available in brass, nickel-plated brass, stainless steel 316L and ...
The KQ2 one-touch bulkhead adaptors are used to ...
Description:
The KQ2 one-touch bulkhead adaptors are used to connect male thread and tube through a panel and are suitable for use with nylon and polyurethane tubes. The special profile design of these fittings provides positive sealing under pressure without reducing ...
Enots compression fittings are ideal for most general ...
Description:
Enots compression fittings are ideal for most general industrial applications. Manufactured entirely from extruded brass bar or hot brass stampings, they can be used under extreme conditions of pressure and temperature, limited for all practical purposes only by the tubing ...