Linear Technology LTC1422CS8#PBF, Hot Swap Controller, 2.7 → 12 V 8-Pin, SOIC

  • RS-artikelnummer 919-9386
  • Tillv. LTC1422CS8#PBF
  • Tillverkare / varumärke Analog Devices
Lagstiftning och ursprungsland
COO (Country of Origin): US

Hot Swap Controllers, Linear Technology

Linear Technology offer a range of Hot Swap controllers providing circuit protection by limiting inrush current as well as fault isolation. They allow electronic circuit boards and cards to be inserted into live system backplanes. Hot Swap controller will sense, control and operate continuously as the boards are hot plugged in or pulled out. They can present board power monitoring via digital measurements of the current and voltage levels by integrated ADCs, accessible through I2C/SMBus interfaces. Linear Technology’s Hot Swap controllers utilise N-channel MOSFETs to control power flow, which allows a wide range of load currents and operating voltages.

These devices are often used in applications such as:
Server rack mount systems
Distributed power systems
Medical Systems, Telecom systems
Set Top Boxes
High side switch/circuit breakers
Switchers / Routers

Monitor, Control and Protection, Linear Technology

Attribute Value
Typical Operating Supply Voltage 2.7 → 12 V
Number of Channels 1
Typical Circuit Breaker Threshold Voltage 50mV
External Sense Resistor Yes
External FET N-Channel
Mounting Type Through Hole
Package Type SOIC
Pin Count 8
Dimensions 10.16 x 6.477 x 3.302mm
Height 3.302mm
Length 10.16mm
Minimum Operating Temperature 0 °C
Width 6.477mm
Maximum Operating Temperature +70 °C
Tillfälligt slut i lager – restorder för leverans 2020-12-09
Pris (ex. moms) Each (In a Tube of 100)
32,442 kr
(exkl. moms)
40,552 kr
(inkl. moms)
Per unit
Per Tube*
100 +
32,442 kr
3 244,20 kr
Related Products
Linear Technology presents a range of micropower monolithic ...
Linear Technology presents a range of micropower monolithic step-down buck converters these are intended for applications that need to increase efficiency at light loads. These devices produce low standby quiescent currents when in burst mode. They can be used in ...
Wide Input Supply: −36 V to −80 VTransient ...
Wide Input Supply: −36 V to −80 VTransient Rating to −100 VImproved Transient ResponseΕnable Input (EN)Programmable Current LimitProgrammable Current Slew RateFault Timer to Eliminate Nuisance TripsOpen−Drain Power Good Output (/PG)Wide input voltage rangeWithstand input voltage spikes to −100 VInput current ...
Provide Safe Hot Swap for +3V to +12V ...
Provide Safe Hot Swap for +3V to +12V Power Supplies with Few External ComponentsUnique Current Regulation Architecture Minimizes n-FET Linear Mode DurationAutoretry Feature (MAX4272/MAX4273)DualSpeed/BiLevel Current Limit Protects Against Current Glitches and Short CircuitsPower-On RESET (MAX4273)15V Absolute ...
Wide +9V to +72V OperationRequires No External Sense ...
Wide +9V to +72V OperationRequires No External Sense ResistorDrives External p-Channel MOSFETLimits Inrush CurrentCircuit-Breaker FunctionLess than 2mA Quiescent CurrentON/Active-Low OFF Input Permits Load Power-Supply Control and SequencingAdjustable Undervoltage LockoutPower-Good Output with +72V RatingLatching ...