PP120 Series Connector Housing, Female

Datablad
Lagstiftning och ursprungsland
RoHS-Försäkran
COO (Country of Origin): US
Produktdetaljer

30A, 75A, 120A Contacts and Housing

Single pole modules which join together with a dovetail to allow the assembly of custom configurations. Module halves are genderless ensuring design flexiblity and ease of assembly. Cyanoarcrylate adhesives may be ulitised to permanently secure module housings together.

Silver Plated copper contacts in 30A, 75A and 120A ratings
Contacts can be crimped or soldered & snap fit into single pole housing
Suitable for process control, panel building and other power applications
Contacts derate when grouped with 4 or more modules, see selection guide table

30A Contacts stock no. 534-963

For suitable crimp tooling see stock no. 531-009 or crimp tool frame stock no. 848-391, with die set stock no. 848-414

75A Contact stock no. 290-6118

For suitable crimp tooling see stock no. 445-885 and die set stock no. 290-5941

120A Contacts stock no. 290-6174

For suitable crimp tooling see stock no. 445-885 and die set stock no. 291-9350

Approvals

UL Listed E26226, CSA Certified LR 25154

//media.rs-online.com/t_line/L0534985-10.gif
//media.rs-online.com/t_line/L534985-02.gif

Note

The PP120 series has bee re-tested under the UL standard and due to this it has been up-rated to 240A. The housing will still state 120SB and show 120A rating until further notice. Please refer to the new datasheet for details.

Approvals

UL Listed E26226, CSA Certified LR 25154

Specifikationer
Attribute Value
Type Connector Housing
Number of Contacts 1
Current Rating 240A
Series PP120
Gender Female
Number of Rows 1
Body Orientation Straight
422 I lager för leverans inom 1 arbetsdagar
Pris (ex. moms) Each (In a Pack of 2)
41,67 kr
(exkl. moms)
52,09 kr
(inkl. moms)
Enheter
Per unit
Per Pack*
2 - 38
41,67 kr
83,34 kr
40 - 148
40,225 kr
80,45 kr
150 - 598
38,775 kr
77,55 kr
600 - 1198
37,225 kr
74,45 kr
1200 +
35,725 kr
71,45 kr
Related Products
For suitable hole cutters, refer to 'D' connector ...
Description:
For suitable hole cutters, refer to 'D' connector cutters (e.g. stock no. 477-8690). Rear entry release crimp contactsPlugs/shells tinned plated for shielding continuityRatchet controlled tool available separately.
Inserts, Screw termination, Male, Polyamide, RAL 9005 (jet ...
Description:
Inserts, Screw termination, Male, Polyamide, RAL 9005 (jet black), Rated current: 10A, Size: 1 A, Contacts: 3, Conductor cross-section: 0.75 ... 1.5mm², Copper alloy, Silver plated, Snap-in latches.
Inserts, Screw termination, Female, Polyamide, RAL 9005 (jet ...
Description:
Inserts, Screw termination, Female, Polyamide, RAL 9005 (jet black), Rated current: 10A, Size: 1 A, Contacts: 3, Conductor cross-section: 0.75 ... 1.5mm², Copper alloy, Silver plated, Snap-in latches.
Individual hoods for use with H-A inserts (plugs ...
Description:
Individual hoods for use with H-A inserts (plugs or sockets – see stock no. 284-8359 – typical of range). Screw terminals with wire protection leaves accept cables up to 2·5mm². Contacts are hard silver plated copper alloyPlug and socket inserts ...