Advance Tapes AT8 Red/White PVC 33m Hazard Tape, 50mm x

  • RS-artikelnummer 711-980
  • Tillv. art.nr 125449
  • Tillverkare / varumärke Advance Tapes
Datablad
Lagstiftning och ursprungsland
RoHS-Försäkran
COO (Country of Origin): GB
Produktdetaljer

Hazard Warning Tapes

Hazard warning tapes help to meet statutory health and safety regulations. The colours are used for marking as indicated below.,Black/Yellow:,Radio active substances, width and height ,restrictions, moving equipment and obstructions,Red/White:,Fire fighting equipment, no smoking areas and flammable substances,Green/White:,Safety equipment, first aid points, emergency escape routes and safe areas

A low stretch PVC that will not shrink back or lift once applied
Very high adhesion level, adheres well long term to rough surfaces
Good abrasion resistance, stands up well to foot and machinery traffic
Flexible and easy to apply round irregular surface
Roll length 33m
Widths vary (see table)
For indoor and outdoor use

Advance Tapes PVC Hazard Warning Tape

The Advance Tapes hazards warning tape is a red/white colour, heavy-duty plasticised PVC film coated with a white, aggressive pressure-sensitive and rubber resin adhesive. This tape is 0.14mm thick, 50mm wide and 33m long. The red/white colours indicate fire fighting equipment, no smoking areas and flammable substances.

Features and Benefits


Low stretch PVC that will not shrink back or lift once applied
• High adhesion level, adheres well long term to rough surfaces
• Good abrasion resistance, stands up well to foot and machinery traffic
• Flexible and easy to apply round irregular surface
• Breaking load is 26N/cm
• Elongation at break 150%
• Excellent conformability, particularly to uneven surfaces
• Non-corrosive adhesive
• Can be applied by hand or machine
• Can be walked on immediately after application

Applications


Statutory health and safety regulations
• Indoor and outdoor use

Specifikationer
Attribute Value
Colour Red/White
Backing Material PVC
Width 50mm
Length 33m
Thickness 0.14mm
Pre-printed None
Adhesion Strength 3.5 N/cm
Tensile Strength 26N/cm
Elongation at Break 150%
Maximum Operating Temperature +60°C
Minimum Operating Temperature 0°C
Adhesive Material Rubber Resin
Model Number AT8
162 I lager för leverans inom 1 arbetsdagar
Pris (ex. moms) Each
152,31 kr
(exkl. moms)
190,39 kr
(inkl. moms)
Enheter
Per unit
1 - 9
152,31 kr
10 - 19
146,21 kr
20 +
141,65 kr
Related Products
A flame retardant polycloth laminate tape coated with ...
Description:
A flame retardant polycloth laminate tape coated with a special pressure sensitive adhesive. Meets the requirements of FAR 25.853, an FAA specification. Specification printed onto tape for easy identification Writable surfaceEasy to tear and to unwindClean peelExcellent adhesionConforms to irregular ...
Angles protection for protecting people, vehicles or equipmentIdeal ...
Description:
Angles protection for protecting people, vehicles or equipmentIdeal for warehouses, factories, parkingDouble Adhesive backed tapeNitrile Butadiene Rubber doubleface tape for fixing oil and grease resistantHigh visibilityAvailable in square or rounded.
Double-sided tape of a tear resistant flexible fabric ...
Description:
Double-sided tape of a tear resistant flexible fabric backing with a rubber adhesiveCan be removed without leaving adhesive residues from sound surfacesIdeal for splicing of fabric webs, carpet laying or laminating of arch supports and heel protectors.
AT160 is a polythene extruded matt cloth tape ...
Description:
AT160 is a polythene extruded matt cloth tape with a waterproof finish coated with an aggressive pressure sensitive adhesive. Polycoated waterproof cloth tapeVery good long term resistance to outdoor exposureVery strongConformable to awkward shapesGood abrasion and puncture resistanceWritable surfaceNon-corrosive ...