Red Lion NPN Hall Effect Sensor switching current 30 mA supply voltage 8 30 V dc

  • RS-artikelnummer 905-5270
  • Tillv. art.nr HESS0000
  • Tillverkare / varumärke Red Lion
Datablad
Lagstiftning och ursprungsland
RoHS-Försäkran
COO (Country of Origin): US
Produktdetaljer

Hess Series Hall Effect Speed Sensor

The Hall Effect speed sensor (HESS) is ideal for sensing steel gears or other
ferrous targets from 0 to 10 KHz. This sensor does not have a minimum
threshold speed as does a magnetic pickup sensor. When the sensor is
first powered up, the output state is indeterminate (Hi or Lo) when the sensor is
not detecting metal. The unit operates from a +8 to +30 V dc power supply and
is reverse polarity protected. The sensor face can be mounted flush into metal
panels. The case is stainless steel and is supplied with 10 feet (3 m) of cable.
The stranded shield wire is not connected to the sensor circuit or case.

Detects steel sensing gears or other ferrous targets
NPN open collector output
Operates from 0 to 10 KHz
3/8” diameter stainless steel case
Epoxy encapsulated for oil
Dirt & moisture resistant
Ideal for Tachometric inputs
Compatible with all red Lion control sensing gears
Cable length of 10 feet (3.05 m)
3 wire, 22 AWG stranded shield wire
100% foil coverage
Grey PVC jacket

Red Lion

Specifikationer
Attribute Value
Output Type NPN
Body Style Barrel
Mounting Style Flush
Supply Voltage 8 30 V dc
Terminal Type Cable
Maximum DC Voltage 30V
Detection Range 1 mm
Switching Current 30 mA
Switching Frequency 0 10 kHz
Length 63.5mm
Width 9.47 (Dia.)mm
Dimensions 9.47 (Dia.) x 63.5 mm
Minimum Operating Temperature -25°C
Housing Material Stainless Steel
Reverse Polarity Protection Yes
Maximum Operating Temperature +70°C
3 I lager för leverans inom 1 arbetsdagar
Pris (ex. moms) Each
1 131,82 kr
(exkl. moms)
1 414,78 kr
(inkl. moms)
Enheter
Per unit
1 +
1 131,82 kr
Related Products
Sick TMM55 series inclination sensors use capacitive MEMS ...
Description:
Sick TMM55 series inclination sensors use capacitive MEMS technology to take a non-contact measurement of the inclination angle of an object in relation to the earth’s gravity. A simple 4-hole mounting and M12 male connector on the cable outlet offers ...
Ceramic based, linear Hall-effect ratiometric devices which produce ...
Description:
Ceramic based, linear Hall-effect ratiometric devices which produce an output voltage proportional to the intensity of the magnetic field to which they are exposed. Three-pin in-line PCB terminals, 0.1in spacingLaser trimmed thin and thick film resistors-40 to 125°C operating range. ...
The inclinometers of the IN81 series allow measuring ...
Description:
The inclinometers of the IN81 series allow measuring 2-dimensional inclinations in the range of ±85° or 1-dimensional inclinations up to 360°.With their high robustness, their high protection level and their wide temperature range from -40°C to +85°C, these devices are ...
Hall effect sensors with output proportional to supply ...
Description:
Hall effect sensors with output proportional to supply voltage and the strength of the magnet fieldSingle current sinking or current sourcing linear outputRail-to-rail operation provides more useable signal for higher accuracyResponds to either positive or negative gaussGood temperature stabilityTypical ...