BALLUFF PNP Hall Effect Sensor supply voltage 10 30 V dc

  • RS-artikelnummer 410-4803
  • Tillv. art.nr BMF 305K-PS-C-2-S4-00,5
  • Tillverkare / varumärke BALLUFF
Datablad
Lagstiftning och ursprungsland
RoHS-Försäkran
COO (Country of Origin): DE
Produktdetaljer

Starter solenoid switch BMF 305K

Electronic switch
Bounce-free switching, no multiple switch points
M8 and M12 plug connectors
Automotive approved
Protection class IP67
Operating voltage 10 → 30 Vdc
3-cable, PNP, NO

Solenoid switch for pneumatic cylinders. "One for all": These sensors let you identify the piston position of pneumatic cylinders through the cylinder wall. Wear and contact-free. Holding brackets / slot nuts available for all commonly available cylinders. Reduced storage - only 1 sensor for different cylinders.

Specifikationer
Attribute Value
Output Type PNP
Supply Voltage 10 30 V dc
Terminal Type Wire Lead
Maximum DC Voltage 24V
Length 33.5mm
Width 10.5mm
Depth 6.5mm
Dimensions 33.5 x 10.5 x 6.5 mm
Maximum Operating Temperature +70°C
Reverse Polarity Protection Yes
Minimum Operating Temperature -25°C
IP Rating IP67
Housing Material Liquid Crystal Polymer
Short Circuit Overload Protection Yes
7 I lager för leverans inom 1 arbetsdagar
Pris (ex. moms) Each
444,64 kr
(exkl. moms)
555,80 kr
(inkl. moms)
Enheter
Per unit
1 - 4
444,64 kr
5 - 11
431,11 kr
12 +
417,08 kr
Related Products
ABS housingOpen collector PNP + NPN OutputNormally open ...
Description:
ABS housingOpen collector PNP + NPN OutputNormally open contact with bounce free operationLED indication of alignment and diagnosisSpecified magnet assembly must be used with this sensorSealed to IP65Cable length 145mmDimensions 32 x 24 x 10 mm.
Sick TMM55 series inclination sensors use capacitive MEMS ...
Description:
Sick TMM55 series inclination sensors use capacitive MEMS technology to take a non-contact measurement of the inclination angle of an object in relation to the earth’s gravity. A simple 4-hole mounting and M12 male connector on the cable outlet offers ...
Ceramic based, linear Hall-effect ratiometric devices which produce ...
Description:
Ceramic based, linear Hall-effect ratiometric devices which produce an output voltage proportional to the intensity of the magnetic field to which they are exposed. Three-pin in-line PCB terminals, 0.1in spacingLaser trimmed thin and thick film resistors-40 to 125°C operating range. ...
Hall effect vanes with integrated magnet for detecting ...
Description:
Hall effect vanes with integrated magnet for detecting metal targets.Ideal for detection or counting applications that cannot be carried out with an infrared sensor.For use in dirty and dusty industrial environments.Vertical or lateral mounting, pin or wire output depending on ...