A1324LLHLT-T Allegro Microsystems,, Linear Hall Effect Sensor, 5V, 3-Pin SOT-23

Lagstiftning och ursprungsland
COO (Country of Origin): PH

A1324/5/6 Linear Hall Effect Sensor with Analogue Output, Allegra Microsystems

The Allegro A1324/5/6 linear Hall-effect sensor ICs provide a voltage output that is proportional to the applied magnetic field. Featuring a quiescent voltage output of 50% of the supply voltage and are pre-programmed to sensitivities of 5.0 mV/g, 3.125 mV/g, and 2.5 mV/g, respectively.

Each IC integrates a Hall element, temperature-compensating circuitry, a small-signal high-gain amplifier, a clamped low-impedance output stage, and a proprietary dynamic offset cancellation technique.

Available in a 3-pin ultra-mini SIP package, and a 3-pin surface mount SOT-23 package.

Temperature-stable quiescent output voltage and sensitivity
Output voltage proportional to magnetic flux density
Low-noise output increases accuracy
Precise recoverability after temperature cycling
Ratiometric rail-to-rail output
Wide ambient temperature range: –40°C to 150°C
Immune to mechanical stress
Solid-state reliability
Enhanced EMC performance for stringent automotive applications

Hall Effect Sensors, Allegro MicroSystems

Attribute Value
Magnetic Type Linear
Mounting Type Surface Mount
Pin Count 3
Minimum Operating Supply Voltage 4.5 V
Maximum Operating Supply Voltage 5.5 V
Length 2.98mm
Width 1.91mm
Height 0.95mm
Dimensions 2.98 x 1.91 x 0.95mm
Minimum Operating Temperature -40 °C
Maximum Operating Temperature +150 °C
Package Type SOT-23
84 I lager för leverans inom 1 arbetsdagar
Pris (ex. moms) Each (In a Pack of 2)
22,695 kr
(exkl. moms)
28,369 kr
(inkl. moms)
Per unit
Per Pack*
2 - 8
22,695 kr
45,39 kr
10 - 18
18,455 kr
36,91 kr
20 - 48
15,975 kr
31,95 kr
50 - 98
13,545 kr
27,09 kr
100 +
12,255 kr
24,51 kr
Related Products
Ceramic based, linear Hall-effect ratiometric devices which produce ...
Ceramic based, linear Hall-effect ratiometric devices which produce an output voltage proportional to the intensity of the magnetic field to which they are exposed. Three-pin in-line PCB terminals, 0.1in spacingLaser trimmed thin and thick film resistors-40 to 125°C operating range. ...
A range of sensor ICs from Diodes Inc utilizing the Hall Effect to implement non-contact switching and sensing functions. Hall Effect ICs fall into three basic categories: Linear Sensors, Switches, and Latches. Linear Sensors have a linear analogue output proportional ...
A range of Hall-effect magnetic sensors from Silicon ...
A range of Hall-effect magnetic sensors from Silicon Labs. The devices combine chopper-stabilized Hall elements, low-noise amplifiers, 13-bit ADCs and comparators to produce high precision magnetically activated switches. The device output changes state if the pre-programmed magnetic threshold is crossed, ...
A range of Hall-effect magnetic sensors from Silicon ...
A range of Hall-effect magnetic sensors from Silicon Labs featuring chopper-stabilized Hall elements, low-noise amplifiers and 13-bit ADCs which provide a linear outputs proportional to magnetic field strength. The Si721x series are available with analogue, PWM or SENT (Single Edge ...