A1326LLHLT-T Allegro Microsystems,, Linear Hall Effect Sensor, 5V, 3-Pin SOT-23

Datablad
Lagstiftning och ursprungsland
RoHS-Försäkran
COO (Country of Origin): PH
Produktdetaljer

A1324/5/6 Linear Hall Effect Sensor with Analogue Output, Allegra Microsystems

The Allegro A1324/5/6 linear Hall-effect sensor ICs provide a voltage output that is proportional to the applied magnetic field. Featuring a quiescent voltage output of 50% of the supply voltage and are pre-programmed to sensitivities of 5.0 mV/g, 3.125 mV/g, and 2.5 mV/g, respectively.

Each IC integrates a Hall element, temperature-compensating circuitry, a small-signal high-gain amplifier, a clamped low-impedance output stage, and a proprietary dynamic offset cancellation technique.

Available in a 3-pin ultra-mini SIP package, and a 3-pin surface mount SOT-23 package.

Temperature-stable quiescent output voltage and sensitivity
Output voltage proportional to magnetic flux density
Low-noise output increases accuracy
Precise recoverability after temperature cycling
Ratiometric rail-to-rail output
Wide ambient temperature range: –40°C to 150°C
Immune to mechanical stress
Solid-state reliability
Enhanced EMC performance for stringent automotive applications

Hall Effect Sensors, Allegro MicroSystems

Specifikationer
Attribute Value
Magnetic Type Linear
Mounting Type Surface Mount
Pin Count 3
Minimum Operating Supply Voltage 4.5 V
Maximum Operating Supply Voltage 5.5 V
Length 2.98mm
Width 1.91mm
Height 0.95mm
Dimensions 2.98 x 1.91 x 0.95mm
Minimum Operating Temperature -40 °C
Maximum Operating Temperature +150 °C
Package Type SOT-23
Tillfälligt slut i lager – restorder för leverans 2020-10-16
Pris (ex. moms) Each (On a Reel of 3000)
10,122 kr
(exkl. moms)
12,652 kr
(inkl. moms)
Enheter
Per unit
Per Reel*
3000 +
10,122 kr
30 366,00 kr
Related Products
The AS5162 is a contactless Hall-based magnetic position ...
Description:
The AS5162 is a contactless Hall-based magnetic position sensor for high accuracy angular measurement over a full turn of 360°. The integrated circuit is a 12-bit rotary position sensor with linear analogue output and overvoltage protection. 360º contactless high-resolution angular ...
The Allegro Microsystems A3213/4 ultra-sensitive, pole independent Hall-effect ...
Description:
The Allegro Microsystems A3213/4 ultra-sensitive, pole independent Hall-effect switches with a latched digital output are aimed at use in battery-operated, portable equipment. Their 2.4 V to 5.5 V operation and a unique clocking scheme reduces the average operating power use. ...
The Allegro A1101/2/3/4 and A1106 Hall-effect switches are ...
Description:
The Allegro A1101/2/3/4 and A1106 Hall-effect switches are produced with BiCMOS technology enabling fast power-on time and low-noise operation. Device programming is performed after packaging, to ensure increased switch-point accuracy by eliminating offsets that could be induced by package stress.Unique ...
The A3211/2 are ultrasensitive, pole independent, Hall-effect switches ...
Description:
The A3211/2 are ultrasensitive, pole independent, Hall-effect switches with latched digital output. Their 2.5 V to 3.5 V operation and unique clocking scheme reduces the average operating power to less than 15 μW with a 2.75 V supply.Either a north ...