2CPS Cable Switch, Dual Direction, 152m, 2NO/2NC

  • RS-artikelnummer 820-3333
  • Tillv. art.nr 2CPSA1A1
  • Tillverkare / varumärke Honeywell
Datablad
Lagstiftning och ursprungsland
Ej tillämpbart
COO (Country of Origin): US
Produktdetaljer

Honeywell 2CPS Cable Pull Safety Switches

The 2CPS cable pull safety switch range is suitable for covering long distances by allowing the user to run a cable in opposite directions from the unit. Each cable can be up to 76 meters allowing for a combined length of 152 meters. This means they are more cost effective than using a comparable multiple emergency stop push button system.

The internal mechanism is latched by both a push and pull action. This provides extra protection should the cable become slackened or broken over time. A midpoint cable tension window indicates the correct cable tension making it easy to set up. Once the contacts have been switched they must be reset by resetting the cable to the correct tension level and manually rotating the rest knob.

For extra protection a set of auxiliary contacts are switched when the main contact open allowing for monitoring or signalling equipment to be activated such as a flashing beacon. The auxiliary contacts are electrically isolated form the direct acting switch contacts meaning a closed circuit can be maintained even when the main contacts are in the open position.

Compliance
The 2CPS complies with: Low Voltage Directive 73/23/EEC, as amended by directive 93/68/EEC; Machinery Directive 98/37/EEC only as the directives relate to the components being used in a safety function; IEC/EN60947-1; IEC/EN60947-5-1; IEC/EN60947-5-5; UL, CE, CSA, SIL 3 capable.

Positive opening actions of normally closed contacts
Choice of 2NC/2NO or 3NC/1NO contact configurations
Maximum 76 meter cable span in one direction allowing for a combined length of 152 meters
Single red high intensity LED status indicator light available (24 Vdc or 120 Vdc)
Die cast zinc housing
Gold plated contacts as standard
Optional hardware packs available

Specifikationer
Attribute Value
Series 2CPS
Reset Button Yes
Normal State Configuration 2NO/2NC
Mounting Orientation Dual Direction
Maximum Rope Span 152m
Maximum Current 50 mA
Maximum AC Voltage 250V
Maximum DC Voltage 60V
Housing Material Die Cast Zinc
Number of Cable Entries 2
Conduit Entry 1/2 inch NPT
Size of Cable Entries 1/2 inch NPT
Depth 92.9mm
Minimum Operating Temperature -40°C
Dimensions 152.4 x 152.4 x 92.9 mm
E-Stop Button No
Maximum Operating Temperature +80°C
IP Rating IP67
Length 152.4mm
Width 152.4mm
2 I lager för leverans inom 1 arbetsdagar
Pris (ex. moms) Each
3 721,22 kr
(exkl. moms)
4 651,52 kr
(inkl. moms)
Enheter
Per unit
1 +
3 721,22 kr
Related Products
These emergency stop trip wire switches are designed ...
Description:
These emergency stop trip wire switches are designed to reduce the risk of injury to persons and damage either to machines or work in progress. They can be tripped by a single human action when a normal emergency stop function ...
These emergency stop trip wire switches are designed ...
Description:
These emergency stop trip wire switches are designed to reduce the risk of injury to persons and damage either to machines or work in progress. They can be tripped by a single human action when a normal emergency stop function ...
The 1CPS cable pull safety switch series is ...
Description:
The 1CPS cable pull safety switch series is intended for applications such as conveyor runs within a defined system zone with a cable run of up to 76 meters. This means they are more cost effective than using a comparable ...
The Preventa XY2CJ emergency stop rope pull switches ...
Description:
The Preventa XY2CJ emergency stop rope pull switches from Telemecanique are designed to prevent injury to people or damage to machinery when a normal emergency stop function is not available. They are easy to install and offer a quick visual ...