RS PRO Natural Die Cast Aluminium Enclosure, IP66, Shielded, 222.2 x 146 x 106.5mm

  • RS-artikelnummer 517-4465
  • Tillverkare / varumärke RS PRO
Datablad
Lagstiftning och ursprungsland
RoHS-Försäkran
COO (Country of Origin): TW
Produktdetaljer

RS Pro IP66 Shielded Die Cast Aluminium Enclosures

Brought to you by RS Pro, a range of IP66 Shielded Die Cast aluminium enclosure boxes. Providing a good quality aluminium alloy, they also supplied with a natural finish and no external coating. The enclosures will tolerate temperatures up to 250°C with no adverse effects to the aluminium or the enclosures structure. All models are highly reliable and excellent quality

Features and Benefits

• Shielded EMI/RFI
• Die cast aluminium alloy ADC 12 (LM24 to BS1490)
• ADC means Aluminium Die Cast
• Lid is lipped to ensure the EMI/RFI screening
• Screening is better than 40dB at 10MHz and 76dB at 100 kHz
• Taper is 1.5° per side lid to base
• High temperature strength
• Various size and wall thickness available

Mounting

• PCB Mounting guides
• Vertical mounting guides
• Guides are on the inner surface of the enclosure

Enclosure / Lid Finish

• Natural aluminium
• Plain
• No external coating
• If you wish to paint then use powder paint
• Seal included

IP66 Seal

• IP66 provides protection from dust and moisture
• Self-adhesive seal
• Neoprene
• Lid thickness is 3 mm incorporating the seal
• Temperature range for the seal is from -20°C to +80°C

Fixing the lid to the base

• The lid is lipped for a tight for to the base
• Taper is 1.5° per side lid to base
• Tapped holes to ensure a close fit
• Fastening holes located outside of the inner space of the enclosure
• M3.5 x 9 mm Supadrive countersunk stainless steel screws as lid fittings
• Recommended screw tightening torque is 5.6 kg

What is an enclosure?

General purpose enclosures are protective boxes, used to house industrial, electronic and other sensitive equipment. Depending on the environment, different levels of protection may be required. These particular boxes enclose electrical components and shield them from EMI/RFI and high temperatures (up to 250°C).

Specifikationer
Attribute Value
Body Material Die Cast Aluminium
External Length 222.2 mm
External Height 106.5 mm
External Width 146 mm
External Dimensions 222.2 x 146 x 106.5mm
IP Rating IP66
Colour Natural
Lid Colour Natural
Flanged No
Shielded Yes
Gasket Material Neoprene
143 I lager för leverans inom 1 arbetsdagar
Pris (ex. moms) Each
384,81 kr
(exkl. moms)
481,01 kr
(inkl. moms)
Enheter
Per unit
1 - 9
384,81 kr
10 - 14
369,12 kr
15 +
353,05 kr
Related Products
Introducing the die cast aluminium range of general ...
Description:
Introducing the die cast aluminium range of general purpose enclosures with mounting flange from RS PRO, a high standard selection of enclosures suitable for a wide range of applications. These durable boxes are made with aluminium alloy, providing electrical conducting ...
Introducing the shielded natural die cast aluminium general ...
Description:
Introducing the shielded natural die cast aluminium general purpose enclosure from RS PRO, a high standard enclosure suitable for a wide range of applications. These durable boxes are made with die cast aluminium alloy, providing shock resistance properties and a ...
Hammond Manufacturing 1590X Diecast Aluminum Enclosures are rugged ...
Description:
Hammond Manufacturing 1590X Diecast Aluminum Enclosures are rugged and easy to machine electronic instrument enclosures.These enclosures provide low wide wall draft angles (2 degrees or less) for easy mounting of printed circuit board. 1590X are lap joint constructed to provide ...
From RS Pro, these aluminium enclosures with flanges ...
Description:
From RS Pro, these aluminium enclosures with flanges for wall mounting or mounting on a place of installation to house electrical components. Made of Aluminium alloy ADC-12 with a stove acrylic finish. Close fitting lips are secured with Stainless Steel ...