Johnson Electric Ovoid Gearbox, 500:1 Gear Ratio, 50 Ncm Maximum Torque

Datablad
Lagstiftning och ursprungsland
RoHS-Försäkran
COO (Country of Origin): DE
Produktdetaljer

Small Reduction Gearbox UGD

A range of low cost, efficient gearboxes designed to be used in conjunction with the Saia-Burgess range of ac synchronous and dc stepper motors.

Maximum gear torque: 32cNm
Output shaft: 4mm diameter, 10mm long
Maximum axial thrust: 10N
Maximum lateral torque: 50cNm
Lateral force: 50N
Mounting position optional (ideal with shaft horizontal)
Mounting with two M3 screws through two 3.5mm diameter holes in side plate
Motor fixing: using simple spring clip

AC Synchronous Motors

These synchronous motors are for direct driving from an a.c. supply. Ideally suited for time driving in instrumentation, machine and process control. The smaller units can be directly connected to the synchronous gearboxes (typical stock no. 332-868 etc).

Specifikationer
Attribute Value
Gear Ratio 500:1
Gearbox Type Ovoid
Maximum Output Torque 50 Ncm
Shaft Diameter 4mm
Overall Width 55mm
Overall Depth 12.5mm
83 I lager för leverans inom 1 arbetsdagar
Pris (ex. moms) Each
155,50 kr
(exkl. moms)
194,38 kr
(inkl. moms)
Enheter
Per unit
1 +
155,50 kr
Related Products
This miniature gearbox is of steel and brass ...
Description:
This miniature gearbox is of steel and brass construction with brass gears and is mounted on a 1mm thickness steel bracket. It incorporatesa high quality three pole motor with sleeved bearings. The design and construction of the unit make it ...
These gearheads are designed to fit Panasonic 3 ...
Description:
These gearheads are designed to fit Panasonic 3 Series 60W (and 90W) AC single and three phase motors. The flange offers improved mounting that is often required for the higher powered motors. Grease-lubricated gearboxes10000hr lifeQuiet operationClass B motor insulation.
Low to medium power dc. motors fitted with ...
Description:
Low to medium power dc. motors fitted with a square mounting flange, centring bush and drive pinion. This allows simple and quick attachment to a 65mm square gearbox. All motors have sintered bronze bearings lubricated for life32mm diameter motors have ...
2 and 3 shaft right angle drive boxes ...
Description:
2 and 3 shaft right angle drive boxes with 1:1 and 2:1 speed ratios. Shafts are machined with keyways to DIN standardsAll gearboxes are supplied correctly filled lubricant retained by seals, which remain functional under normal operating conditions2 shaft version ...