Huco T Gearbox, 2:1 Gear Ratio, 4.1 Nm Maximum Torque

  • RS-artikelnummer 299-0107
  • Tillv. art.nr 390.02.12
  • Tillverkare / varumärke Huco
Datablad
Lagstiftning och ursprungsland
RoHS-Försäkran
COO (Country of Origin): IT
Produktdetaljer

Gearboxes

2 and 3 shaft right angle drive boxes with 1:1 and 2:1 speed ratios.

Shafts are machined with keyways to DIN standards
All gearboxes are supplied correctly filled lubricant retained by seals, which remain functional under normal operating conditions
2 shaft version also available in reverse rotation

//media.rs-online.com/t_line/L298999-01.gif
Specifikationer
Attribute Value
Gear Ratio 2:1
Gearbox Type T
Maximum Output Torque 4.1 Nm
Shaft Diameter 15.01mm
Overall Length 4.094in
Overall Width 4.843in
Overall Depth 2.047in
2 I lager för leverans inom 1 arbetsdagar
Pris (ex. moms) Each
1 695,02 kr
(exkl. moms)
2 118,78 kr
(inkl. moms)
Enheter
Per unit
1 +
1 695,02 kr
Related Products
These gearheads are designed to fit Panasonic 3 ...
Description:
These gearheads are designed to fit Panasonic 3 Series 60W (and 90W) AC single and three phase motors. The flange offers improved mounting that is often required for the higher powered motors. Grease-lubricated gearboxes10000hr lifeQuiet operationClass B motor insulation.
Panasonic 3 Series Motors, with identical mounting dimensions ...
Description:
Panasonic 3 Series Motors, with identical mounting dimensions as the G Series, replace and offer the following benefits over G Series Motors:. Grease-lubricated gearboxes10000hr lifeQuiet operationClass B motor insulation.
The motors and gearheads are connected by simply ...
Description:
The motors and gearheads are connected by simply screwing the gearhead onto a thread on the motor body, and then applying tiny spot of high impact adhesive in the thread to lock the construction tight. Very high output torque due ...
Two types of L-Shaped right angle drive boxes. ...
Description:
Two types of L-Shaped right angle drive boxes. One has hardened steel gears and the other Acetal Homopolymer gears bonded to hardened steel shafts. Nylon housing has two counter-bored clearance holes for conventional chassis mounting and a tapped insert below ...