McLennan Servo Supplies Spur Gearbox, 100:1 Gear Ratio, 4 Nm Maximum Torque

Datablad
Lagstiftning och ursprungsland
RoHS-Försäkran
COO (Country of Origin): CH
Produktdetaljer

Adaptable Gearboxes 4Nm

A range of high quality steel geared gearboxes with the following features:

Maximum output 4Nm
Metal throughout for high reliability and performance and dissipation of heat
Sintered bronze bearings
Maximum radial load on output shaft 25N
Maximum axial load on output shaft 20N
Maximum continuous output power 15 watts
Output shaft sealed to eliminate grease escaping from the gearbox
Comprehensive instruction sheet supplied giving fitting instructions

//media.rs-online.com/t_line/L718852-01.gif
//media.rs-online.com/t_line/LD718852-02.gif
//media.rs-online.com/t_line/LE718852-01.gif
//media.rs-online.com/t_line/LI718852-01.gif

0.9° and 1.8° Hybrid Stepper Motors

1.8° Step Angle,The motors are directly compatible with the stepper motor drive boards and also drive either motor (if required) in the half step mode i.e. 0.9° per step resulting in higher resolution, greater performance stability and faster stepping rates. Direction, velocity, acceleration/deceleration can be controlled by a stepper motor controller.,Applying the correct electrical pulse sequence to the windings of the stepper motor results in a 1.8° step angle rotation of the spindle (i.e. 200 steps per revolution). When correctly loaded and driven these motors will produce discrete output steps. The number of steps and speed of rotation are determined by the number of pulses and frequency of the input signal. This provides an ideal method for speed and position control. The motors are directly compatible with stepper motor drive boards.,Applications include:

Robotics
Paper feed mechanisms
Teletype printers
Small machine tools
Computer peripherals
X-Y plotters

Specifikationer
Attribute Value
Gear Ratio 100:1
Gearbox Type Spur
Maximum Output Torque 4 Nm
Overall Width 56mm
Overall Depth 41mm
3 I lager för leverans inom 1 arbetsdagar
Pris (ex. moms) Each
981,96 kr
(exkl. moms)
1 227,45 kr
(inkl. moms)
Enheter
Per unit
1 +
981,96 kr
Related Products
A range of Crouzet DC motors from the ...
Description:
A range of Crouzet DC motors from the 82 8900 series with a maximum output torque of 10 Nm. These geared motors are particularly suitable for use in applications such as valves, pumps, medical equipment, access barriers, turnstiles, lift doors, ...
High quality ovoid reduction gearboxes of similar construction ...
Description:
High quality ovoid reduction gearboxes of similar construction to the synchronous gearboxes. A double-ended Ø4mm output shaft is fitted in order to accommodate a servo potentiometer mounting kit and conductive plastic potentiometers, when used in positional servo applications.,Alternatively, the gearbox ...
These gearheads are designed to fit Panasonic 3 ...
Description:
These gearheads are designed to fit Panasonic 3 Series 60W (and 90W) AC single and three phase motors. The flange offers improved mounting that is often required for the higher powered motors. Grease-lubricated gearboxes10000hr lifeQuiet operationClass B motor insulation.
The motors and gearheads are connected by simply ...
Description:
The motors and gearheads are connected by simply screwing the gearhead onto a thread on the motor body, and then applying tiny spot of high impact adhesive in the thread to lock the construction tight. Very high output torque due ...